MRS16000C6203FC100

Series:	MRS16
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	620 kOhms
Tolerance:	±1%
Power (Watts):	0.4W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	--
Size / Dimension:	0.063" Dia x 0.142" L (1.60mm x 3.60mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: MRS16000C6203FC100 application field and working principle

Through hole resistors are electronic components that are used to reduce current flow, adjust signal levels and divide voltages. They are also commonly used as an integral part of the circuit board when assembling printed circuit boards.The MRS16000C6203FC100 is a Through Hole Resistor made of two conductive metal plates spaced between each other and covered with an insulating material, which can resist the flow of electrons. This resistor also can limit current to the prescribed amount, allowing it to be used in various application fields. The most common application field of the MRS16000C6203FC100 is in the automotive industry. The resistor is used to act as a current-limiting device to protect components in circuits from over-current damage if the operating circuits, such as lamps, were to fail. This is due to its high resistance against current flow, and its ability to perform efficiently at higher temperatures. It is also ideal for use in audio and lighting circuits, where its high voltage-handling capability can be beneficial.In terms of its working principle, the MRS16000C6203FC100 is a variable resistor. It limits the flow of electrons that pass through the circuit by providing a resistance between two points. When the operating voltage exceeds the predetermined resistance threshold, the resistor will cause a voltage drop across its two terminals. This results in a smaller current flow, which prevents overloading and damage to the components in the circuit. The MRS16000C6203FC100 is also capable of adjusting the impedance of a circuit, by varying the voltage that is applied to it. This allows it to be used in the calibration of transistors, amplifiers, and other components in an electronic circuit. The resistor can also be used for frequency tuning, as its resistance value can be adjusted to provide an effective compensation for various frequencies.Because of its various applications in the automotive, audio, and lighting industries, and its ability to provide high voltage-handling capability and frequency tuning, the MRS16000C6203FC100 is an invaluable tool when it comes to designing and assembling printed circuit boards. Its simple design and working principle make it an ideal choice for cost-effective, reliable and reliable performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description