MS0850506F065C1C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Snap Action, Limit Switches are used for a variety of applications in both the industrial and commercial settings. They are mainly used to switch or detect signals between two circuits depending on their physical or electrical properties. In this article, we will discuss the application field and working principle of the MS0850506F065C1C.

The MS0850506F065C1C is a Push-to-Make (A) switch with a standard travel of 0.25 inch. It has a current rating of 0.6A at 220VAC, a voltage rating of 220VAC, a contact resistance of 70mΩ MAX and an insulation resistance of 1000MW MIN. This switch is typically used in industrial applications such as power control, marine, industrial electronics, emergency stop, machine tools, and automation.

The operation of the MS0850506F065C1C is based on the principle of snap action. A snap action switch is a switch that changes its state with a sudden motion known as a snap. This motion is typically produced by an overload or a change in pressure or temperature. The switch has a spring-loaded armature that rotates under the action of a solenoid or other force. As the armature rotates, it changes the contact opening or closing of the switch.

The switch is operated by means of a push button (push to make) or release button (push to break). When depressed, the armature is pushed open and the electrical circuit connected to the switch is broken. Releasing the push button will cause the armature to rotate back to its original position, thereby making the electrical connection and allowing for current flow. It is important to note that this type of switch does not make contact until pushed, which is why it is commonly used for safety applications.

The MS0850506F065C1C snap action, limit switch is designed to operate up to a specific temperature or pressure. This means that when the temperature or pressure exceeds the specified limits, the armature of the switch will rotate and break the connection, thus preventing any further current flow. This is particularly useful for applications where the temperature or pressure is likely to increase beyond a certain point. It is also useful for applications where accidental contact may occur, such as in industrial settings.

In conclusion, the MS0850506F065C1C is a Snap Action, Limit Switch with a standard travel of 0.25 inch. It has a current rating of 0.6A at 220VAC and is typically used in industrial applications such as power control, marine, and industrial electronics. It is operated by means of a push button and is designed to operate up to a specific temperature or pressure. This switch is ideal for applications where accidental contact may occur and it is also useful for applications where the temperature or pressure is likely to increase beyond a certain point.

The specific data is subject to PDF, and the above content is for reference