Allicdata Part #: | MS1515004-B-ND |
Manufacturer Part#: |
MS15 15004-B |
Price: | $ 1.95 |
Product Category: | Circuit Protection |
Manufacturer: | Ametherm |
Short Description: | ICL 15 OHM 25% 4.5A 15MM |
More Detail: | Inrush Current Limiter 15 Ohms ±25% 4.5A 0.59" (15... |
DataSheet: | MS15 15004-B Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
100 +: | $ 1.77502 |
Series: | MS32 |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
R @ 25°C: | 15 Ohms |
Tolerance: | ±25% |
Current - Steady State Max: | 4.5A |
R @ Current: | 850 mOhms |
Diameter: | 0.59" (15mm) |
Lead Spacing: | 0.307" (7.80mm) |
Approvals: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Inrush current limiters (ICLs) are one of the most important components of modern electrical systems, greatly increasing system safety levels and reducing the overall power use of the circuit. The MS15 15004-B is an example of an inrush current limiter, designed to limit the inrush current which occurs when capacitors, contactors, and other power components are connected to a line or circuit.
The MS15 15004-B inrush current limiter works by using resistance, inductance, and capacitance to control the inrush current. A resistor is positioned in the limiter, creating a short circuit at low voltages which limits inrush current. An inductor is then added to delay the current which increases after the resistor\'s resistance decreases, allowing the current to flow gradually while keeping inrush current limited. Finally, a capacitor is added to store energy that is released when the voltage begins to rise. This allows for the current to be delayed even further, allowing the system to gradually draw power from the line.
The MS15 15004-B provides a wide range of applications fields, making it suitable for most electrical systems. The limiter can be used in a wide variety of motors, pumps, and other electrical devices, helping to reduce the risk of inrush current and improve the safety level of the system. The limiter can also be used in a wide range of industrial applications, such as mine hoists, compressors, and automated factory equipment.
The MS15 15004-B is specifically designed to limit inrush current in applications where high current loads and loads with long inrush currents are needed. This makes it the perfect choice for applications requiring high current levels, such as solar power grids, electric vehicles, and home appliances. The limiter is also suitable for applications that require high current and very low noise levels, such as computer systems and audio equipment.
In addition to its ability to limit the inrush current, the MS15 15004-B also offers protection from over-current and over-voltage conditions. The limiter can be installed in lines or circuits to prevent current levels from going beyond their specified levels, allowing for better control of the system. The limiter is also designed with a built-in protection circuit which helps to protect the system from power surges and other damaging conditions.
The MS15 15004-B inrush current limiter is an incredibly useful component for any electrical system. Its ability to control the inrush current helps to keep the system safe and efficient, while its other features make it ideal for a wide range of applications. The limiter is the perfect choice for those looking for a reliable, low-maintenance, and long-lasting solution for their circuit design.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
MS151J-HRMJ | Hirose Elect... | 55.99 $ | 1000 | CONN ADAPT COAX JACK TO S... |
MS151P-HRMJ | Hirose Elect... | 72.81 $ | 1000 | CONN ADAPT COAX PLUG TO S... |
MS15 30004 | Ametherm | 1.94 $ | 445 | ICL 30 OHM 25% 4.2A 15MMI... |
MS1512 | Microsemi Co... | 39.42 $ | 1000 | TRANS BIPO NPN M122RF Tra... |
MS1509 | Microsemi Co... | 109.52 $ | 1000 | TRANS RF BIPO 260W 15A M1... |
MS1582 | Microsemi Co... | 120.48 $ | 1000 | TRANS RF BIPO 135W 8A M17... |
MS1579 | Microsemi Co... | 0.0 $ | 1000 | TRANS RF BIPO 65W 5.2A M1... |
MS156LH1-HRMJ-088V300A | Hirose Elect... | 66.31 $ | 1000 | CBL ASSY SMA-MS-156 11.81... |
MS151P-HRMJ-1 | Hirose Elect... | 103.2 $ | 20 | CONN ADAPT COAX PLUG TO S... |
MS15 15004 | Ametherm | 0.94 $ | 1000 | ICL 15 OHM 25% 4.5A 15MMI... |
MS15 15004-A | Ametherm | 1.2 $ | 1000 | ICL 15 OHM 25% 4.5A 15MMI... |
MS15 30004-A | Ametherm | 1.2 $ | 1000 | ICL 30 OHM 25% 4.2A 17MMI... |
MS15 40004-A | Ametherm | 1.2 $ | 1000 | ICL 40 OHM 25% 4.1A 17MMI... |
MS15 30004-B | Ametherm | 1.2 $ | 1000 | ICL 30 OHM 25% 4.2A 17MMI... |
MS15 40004-B | Ametherm | 1.2 $ | 1000 | ICL 40 OHM 25% 4.1A 17MMI... |
MS15 40004 | Ametherm | 1.42 $ | 1000 | ICL 40 OHM 25% 4.1A 15MMI... |
MS15 15004-B | Ametherm | 1.95 $ | 1000 | ICL 15 OHM 25% 4.5A 15MMI... |
MS1512BF | Eaton | 1.5 $ | 1000 | COVER FOR CB 1000 SERIES ... |
MS1524BF | Eaton | 1.99 $ | 1000 | COVER FOR CB 1000 SERIES ... |
G125-MS15005L0P | Harwin Inc. | 11.88 $ | 717 | 1.25MM M HSG 50POS SMTCon... |
G125-MS15005L3P | Harwin Inc. | 12.64 $ | 71 | 1.25MM M HSG 50POS SMTCon... |
G125-MS15005M2P | Harwin Inc. | 10.83 $ | 73 | CONN HDR 1.25MM VERT SMT ... |
G125-MS15005L0R | Harwin Inc. | 9.08 $ | 1000 | 1.25MM M HSG 50POS SMTCon... |
G125-MS15005L3R | Harwin Inc. | 9.67 $ | 1000 | 1.25MM M HSG 50POS SMTCon... |
ICL 1.3 OHM 25% 8A 13.97MMInrush Current...
ICL 10 OHM 20% 5A 12MMInrush Current Lim...
ICL 4 OHM 20% 23A 30MMInrush Current Lim...
ICL 16 OHM 20% 4A 22MMInrush Current Lim...
ICL 16 OHM 25% 4A 19.56MMInrush Current ...
ICL 33 OHM 20% 2.5A 15MMInrush Current L...