MSP430F2013TPW

Program Memory Type:	FLASH
Base Part Number:	MSP430F2013
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 105°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 10x16b
Voltage - Supply (Vcc/Vdd):	1.8 V ~ 3.6 V
RAM Size:	128 x 8
EEPROM Size:	--
Series:	MSP430F2xx
Program Memory Size:	2KB (2K x 8 + 256B)
Number of I/O:	10
Peripherals:	Brown-out Detect/Reset, POR, PWM, WDT
Connectivity:	I²C, SPI
Speed:	16MHz
Core Size:	16-Bit
Core Processor:	MSP430
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MSP430F2013TPW is a microcontroller from Texas Instruments (TI), specifically the industry’s first 16-bit process to integrate programmable analog and embedded-level device-level register configuration. It offers increased performance and enhanced peripheral options such as High Resolution Timers, dual-operating-mode watchdog timer, isolation protection, 10-bit ADC and LCD controller, compared to other embedded microcontrollers. The MSP430F2013TPW is used in a variety of applications, requiring low power consumptions, high performance, and scalability. It provides an excellent balance of performance, power efficiency, and low area cost.

Application Fields

The MSP430F2013PF is used in a wide range of applications ranging from consumer electronics, automotive, sensing and control systems, industrial automation, healthcare, mobile computing, and communication devices.Its key features such as ultra-low power operation, low active power dissipation and ultra-low current consumption make it ideal for motor controller applications, DC motor control, industrial automation, and home automation.The MSP430F2013TPW\'s on-chip Peripheral Input/Output (PI/O) unit with 16 GPIO pins provide an easy way to interface with small value capacitor, voltage/current sensors, making it suitable for automotive and industrial automation systems, home lighting and appliance control. The integrated 10-bit ADC with up to 4 channels and 14-bit Sigma Delta ADC with 8 channels provides improved line input accuracy with the ability to measure and compare signals. This feature makes it ideal for calling systems, remote monitoring, fault detectors and temperature sensors. The device also offers a 2x 16-bit Timer_A2 and 3x 16-bit Timer_B2 in addition to 2x 16-bit Core Timers which can be used in pulse width modulation/frequency modulation, signal conditioning, and asynchronous interface applications

Working Principle

The MSP430F2013TPW features an integrated 16-bit high-speed CPU core that can execute up to 3 instructions in a single cycle enabling the device to achieve up to 12.8MIPS at 16MHz clock rate. The core features a 16-bit arithmetic logic unit (ALU), 32-bit program counter, three data pointer registers, and 16 memory access registers (R0-R15). The MSP430F2013TPW provides 256K-bytes of flash memory and three banks of RAM. Each bank of RAM has 64 Kbytes of SRAM and 128 Kbytes of RAM. The MSP430F2013TPW also comes with 512 B of OTP RAM.The 16-bit RISC CPU provides a programmable stack pointer, 16 X/Y/Z index registers and 32 working registers that are used to hold intermediate results. The key feature of the MSP430F2013TPW is that it can be configured to run with lower power consumption, reducing current consumption and extending battery life. The device can operate in either Active Mode or LPMX. The Active Mode is the most traditional operating mode where the device runs at maximum performance. The LPMX mode is designed for lower power consumption and implements power management features such as CPU clock gating and reduced frequency modulation of peripherals.The MSP430F2013TPW also features on-board debugging capabilities which allow for programming and debugging from the onboard emulator. The debugger supports the following features: flash storage, register and memory viewer, break point programming and debugging.

Conclusion

The MSP430F2013TPW is an ideal choice for embedded applications requiring higher performance, scalability, and low power. With its various features and wide range of applications, the MSP430F2013TPW is a great value for customers. Its reduced active power consumption and integrated on-chip debugging capabilities make it an excellent platform for developers to quickly develop and debug their applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description