MSP430F6778IPEU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MSP430F6778IPEU is an embedded microcontroller designed and manufactured by Texas Instruments. It is designed to be used in a wide range of applications such as embedded systems, digital signal processing (DSP) systems, and consumer electronics. The MSP430F6778IPEU is a 16-bit, low-power, high-performance microcontroller that integrates several peripheral devices and a rich peripheral set, making it a suitable choice for embedded applications. It has an advanced interrupt architecture, an optimized instruction set for high-performance operations, and a unique set of embedded memory types.

Overview

The MSP430F6778IPEU is a 16-bit RISC microcontroller with a wide range of built-in peripherals and memory. It has up to 32KB of Flash memory and 2KB of RAM. It also has multiple channels of 12-bit analog-to-digital (ADC) conversion capability and several serial communication channels. It has two comparators, an 8-bit timer, a 16-bit timer, a real-time clock module, a controller area network (CAN) module, and a universal asynchronous receiver/transmitter (UART).

Power Domain & Clock Sources

The MSP430F6778IPEU has up to three power domains: the main domain, the low-power domain, and the sleep domain. The main domain is powered by an external power supply and provides clock signals for the other domains. The low-power domain provides clock signals for the peripherals and is powered by a dedicated oscillator. The sleep domain is the lowest power domain and is powered by an internal oscillator.

The MSP430F6778IPEU has a 16-MHz resonator oscillator and a 32-kHz low frequency oscillator as clock sources. The 32-kHz low frequency oscillator is used for power management and Brownout protection. The 16-MHz oscillator is used to generate the main clock signal and can be configured to run at 8 MHz, 4 MHz, 2MHz, 1MHz, or 0.5 MHz.

Memory

The MSP430F6778IPEU features up to 32KB of Flash memory and up to 2KB of RAM. The Flash memory can be used for code storage, data storage, and for programming and debugging. The RAM is used for data storage, data manipulation, and instruction storage. The RAM can be configured as single bytes or words for data storage and for instruction storage.

Peripherals

The MSP430F6778IPEU features several peripheral interfaces. It has up to four universal asynchronous receiver/transmitters (UARTs) and up to four controller area networks (CANs). These interfaces allow the microcontroller to communicate with other devices, including external sensors, data converters, and other peripherals. The UARTs can be used for both serial and parallel communications. The CAN interface can be used for communication over a bus or in a multi-master environment.

The MSP430F6778IPEU also has two comparators, an 8-bit timer, a 16-bit timer, a real-time clock module, and a power management module. The comparators can be used for precision measurement, for comparing two analog signals, for creating digital logic signals, or for detecting the level of an analog signal. The 8-bit and 16-bit timer modules are used for generating periodic, one-shot, pulse-width-modulated (PWM), or other types of output. The real-time clock module can be used for time-stamping events, for creating periodic interrupts, or for waking up the microcontroller from a low-power state. The power management module allows the microcontroller to enter and remain in a low-power state.

Power Consumption

The MSP430F6778IPEU is designed for low-power operation. It is capable of entering a low-power state and consuming less than 1µA of supply current. To maintain a low-power state, the microcontroller can be programmed to enter and remain in sleep mode, shut down some parts of the system, or disable unnecessary peripherals. The microcontroller can also be programmed to switch between different power modes to ensure that the most appropriate power level is maintained for maximum efficiency.

Application Fields

The MSP430F6778IPEU can be used in a wide range of embedded applications, including digital signal processing (DSP) systems, automation systems, process control systems, motor control systems, and consumer electronics. It can also be used for data acquisition systems, digital power conversion, patient monitoring, smart metering, home appliances, industrial automation, automotive systems, and other areas.

Conclusion

The MSP430F6778IPEU is an embedded microcontroller designed and manufactured by Texas Instruments. It is a 16-bit, low-power, high-performance microcontroller designed for a wide range of application fields. It integrates multiple peripherals and a rich peripheral set and is capable of low-power operation. It is suitable for embedded applications, digital signal processing (DSP) systems, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference