MSR3-0R025F1

Series:	MSR
Packaging:	Bulk
Part Status:	Active
Resistance:	25 mOhms
Tolerance:	±1%
Power (Watts):	3W
Composition:	Metal Element
Features:	Current Sense
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-65°C ~ 275°C
Package / Case:	Radial
Supplier Device Package:	--
Size / Dimension:	0.598" L x 0.067" W (15.20mm x 1.70mm)
Height - Seated (Max):	1.000" (25.40mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

MSR3-0R025F1 Application Field and Working Principle

Through hole resistors are electronic components wired into printed circuit boards. They are produced in different sizes and shapes and are used to fine-tune electrical current in circuits. The MSR3-0R025F1 type of component is a fixed through-hole axial resistor which is widely used in various applications. This article will look into how this type of resistor is used and how it works.A through hole resistor in its basic form is a simple device with two leads or pins. As current flows through the resistor, it produces a voltage drop proportional to the size of the resistor. When sizing a through-hole resistor for a particular application, it is important to take into account the amount of power that needs to be dissipated.The MSR3-0R025F1 type of through hole resistor is a well known component because of its wide variety of applications. Firstly, it is used in power supplies, where it is used to regulate the amount of current that is flowing in the circuit. In some high-voltage circuits, the MSR3-0R025F1 can be used as a current regulator, preventing it from exceeding the rated value of the capacitor.The MSR3-0R025F1 can also be used as a voltage regulator in low-voltage power supplies. In this case, the resistor reduces the voltage in a circuit. It can also be used to control the current in analogue circuits. In such applications, the resistor is typically connected in series with the transistor or other active components and helps provide the precise voltage values needed for the circuit.The MSR3-0R025F1 also finds its use in medical applications, such as patient monitoring systems, where it serves to regulate the voltage to prevent damaging the sensitive equipment. Moreover, they are used in many consumer electronics devices and automotive applications where safety is very important.When it comes to its construction, the MSR3-0R025F1 consists of a cylindrical body with pins on its two ends. The size of the resistor is specified in ohms and it is usually printed on one side of the resistor. The pins of the resistor are wired into the printed circuit board by soldering them together.The working principle of the MSR3-0R025F1 is fairly simple: when current passes through it, it produces a voltage drop which is proportional to the size (in ohms) of the resistor. This voltage drop is then used to fine-tune the voltage in the circuit.In conclusion, the MSR3-0R025F1 type of through hole resistor has a multitude of uses. It is widely used in power supply applications where it is used as a regulator or current controller. It also finds use in medical and automotive applications. Despite its simplicity, the MSR3-0R025F1 is a well-engineered piece of equipment that is essential for many electrical and electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description