MT221024 Relays

Switching Voltage:	400VAC - Max
Coil Resistance:	475 Ohms
Coil Power:	1.2 W
Contact Material:	Silver Nickel (AgNi)
Operating Temperature:	-40°C ~ 60°C
Termination Style:	Plug In, 8 Pin (Octal)
Mounting Type:	Socketable
Features:	Test Button
Release Time:	10ms
Operate Time:	15ms
Turn Off Voltage (Min):	2.4 VDC
Turn On Voltage (Max):	18 VDC
Series:	MT, SCHRACK
Contact Rating (Current):	10A
Contact Form:	DPDT (2 Form C)
Coil Voltage:	24VDC
Coil Current:	50.0mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

A power relay is an electronic device that is used to turn a power load on or off. In electronics, a relay is a device that uses an electromagnet to switch power or ground connections in a circuit. The MT221024 is a type of power relay that is designed for applications that require a high power transfer.The MT221024 relay is designed to control power loads of over 2 Amps and has an open or closed form rating. It is a type of power relay which uses a permanent magnet to open or close its contacts depending on the position of the magnet. The physical size of the relay is quite small and is made from a lightweight material. The operating voltage of the relay is 24 volts DC.The MT221024 is available in single and dual form configurations. The single configuration has a single changeover contact and a single normally open contact. The dual configuration has two changeover contacts and two normally opens. Each contact is rated to carry up to 2 Amps of current.In terms of operation, the MT221024 is a low-energy consumption relay due to its electronic design. When the power is switched on, the permanent magnet will energize the switching contacts, causing them to open or close based on the position of the magnet. This will allow the power source to be connected to or disconnected from the load. Once the power is switched off, the permanent magnet will release the contacts, allowing them to return to their normally open or closed state.When it comes to applications, the MT221024 is most commonly used in industrial, automotive and medical equipment. Its ability to carry a high current makes it an ideal choice for applications such as motor control, switching between various equipment states or providing a safe power route during manufacture or maintenance.The MT221024 is a reliable relay, designed to switch currents of over 2 Amps of power. Its relatively small physical size and low energy consumption makes it a suitable choice for a range of applications. Additionally, its dual and single form configurations offer maximum versatility when connecting a power source and a load.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description