MXLRT100KP220CAE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS – Diodes are generally used for providing protection against transient voltage and is widely used in in many electronic applications including EMI/RFI filter application and various other kinds of electric circuit protection. The MXLRT100KP220CAE3 is a common diode of this particular type.

Specifically, the MXLRT100KP220CAE3 is a bidirectional Transient Voltage Suppressor(TVS) diode in a unidirectional configuration designed to protect sensitive electronic components against high voltage transients. It has a small size, and is designed to provide a fast response time. It is made from a silicon avalanche junction diode with a built-in surge protection device and is designed for use on both analogue and digital circuits, allowing fast response reactive protection measures to be taken without the need for external components. This type of diode is generally used in automotive and telecommunications application, and is found in a wide variety of consumer electronic devices.

The MXLRT100KP220CAE3 is constructed of two diodes in one package. The two diodes are reverse polarity and opposite directions, with the output connected to the common node. A Schottky diode acts as a protection device on the common node while the other diode provides reverse voltage protection. The protection circuit is designed for a voltage rating of 100V and a power rating of 220W. When the supply voltage reaches a certain level, the diode conducts and a current flows. Depending on the input voltage, this current can be continuous, for protection against overvoltage, or pulsed, for protection against spikes.

The diodes are designed to clamp the voltage to a certain limit by dissipating the excess energy. For example, when presented with a voltage spike of 72V, the diode will dissipate the excess energy in the form of heat, limiting the output voltage to around 29V, thus protecting downstream components from the potentially damaging voltage. The current is limited to a certain level by the diode’s low breakdown voltage. The diode can also be used in Zener diode mode, to provide an output voltage of between 3.2 and 3.7V, where suitable.

The device is designed to provide protection against high-voltage transients, and the clamping voltage is a function of the applied potential across the two diodes and the device’s capacitance. In normal operation, the device exhibits very low leakage current and fast response time. The device is suitable for high-frequencies and a wide range of transient protection applications.

The MXLRT100KP220CAE3 is designed for use in a wide range of protection applications and are suitable for use in automotive and telecommunications applications. Common applications include consumer electronics, computers, modems, cell phones, bar-code readers, etc.where a fast response is required.

The specific data is subject to PDF, and the above content is for reference