MXRT100KP220AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS – Diodes are devices that are used in protecting electronic devices from high-voltage and transient currents that could occur due to lightning strikes or other hazards. The MXRT100KP220AE3 is one such TVS device that can be used to protect circuits from high voltages and provide effective shielding. It is a unidirectional device that needs external circuitry for over-voltage and over-current protection.

The MXRT100KP220AE3 is an application-specific integrated circuit (ASIC) and contains a voltage clamping device. The device consists of a Zener diode, a silicon-controlled rectifier (SCR), and a thin film resistor network. The resistor network is designed to limit excessive currents from passing through the diode. The SCR acts as a switch, turning on and off the Zener diode to limit the voltage that can pass through the device. The voltage drop is adjustable and can be set by adjusting the resistor values in the network.

The MXRT100KP220AE3 is ideal for over-voltage and over-current protection applications. The device can be used to protect circuits from transients that occur from lightning strikes or other sources. The device can also be used to clamp down voltage spikes, such as electrostatic discharge (ESD). The device has a threshold voltage of 5V, a breakdown voltage of 11.8V, and a peak pulse current of 100kA. It is designed to handle pulse current up to 6A.

The MXRT100KP220AE3 is designed to clamp down voltage spikes and limit the voltage passing through the protected circuit elements. When a transfunction occurs that causes a high-voltage pulse, the energy will be channeled through the device and reduced to a safe level. The transient current is then diverged through the resistor network, limiting the peak current that can pass through the device. This provides effective protection to the circuit elements from over-voltage and over-current events.

The MXRT100KP220AE3 is designed to provide effective protection to circuits from high-voltage and transient pulsed currents. The device offers adjustable voltage clamps, with a threshold voltage of 5V and a breakdown voltage of 11.8V. It is designed to handle pulse current up to 6A and peak pulse current of 100kA. This makes the device ideal for over-voltage and over-current protection applications, including protection from lightning strikes and other transients.

The specific data is subject to PDF, and the above content is for reference