NC4EBD-JP-DC12V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power relays are a type of electrical control device used to switch electrical circuits on and off electrically. Relays make it possible to control larger loads, such as larger motors or heaters, that would be impossible to switch using a standard switch. The NC4EBD-JP-DC12V is a type of power relay which is designed for use in applications where a low voltage relay is necessary for controlling higher voltage power loads.

The NC4EBD-JP-DC12V is a high-current, double-pole, single-throw (DPST) type of relay. The relay is rated to handle 2A loads at 12V and up to 7A loads at 24V. It is also designed with an LED indicator to show when the relay coil is energized. This indicator is used as a diagnostic tool to allow the user to know when the relay is activated.

The NC4EBD-JP-DC12V is mainly used in applications such as motor control, lighting control, and general power switching applications. The relay can be used to switch higher current loads such as air conditioners, pumps, and other high-current load applications. The relay is also commonly used in battery powered applications because of its low voltage rating and ability to switch high current loads.

The working principle of the NC4EBD-JP-DC12V is relatively simple. The relay operates by energizing the coil with current, which activates an electromagnet inside the relay. This causes an armature to move, which allows the circuits to be connected and disconnected. When the current is removed, the armature returns to its original position, thus disconnecting the circuits. This enables the user to switch loads on and off with the simple toggle of a switch.

In conclusion, the NC4EBD-JP-DC12V is a high-current, low-voltage relay used primarily in motor control, lighting control, and general power switching applications. It is rated to handle 2A loads at 12V and up to 7A loads at 24V, and is readily available from most electrical component suppliers. The relay works by energizing the coil with current, which activates an electromagnet, enabling the user to switch high current loads on and off with the simple switch of a switch.

The specific data is subject to PDF, and the above content is for reference