NC7NP34K8X

Series:	7NP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Buffer, Non-Inverting
Number of Elements:	3
Number of Bits per Element:	1
Input Type:	--
Output Type:	Push-Pull
Current - Output High, Low:	2.6mA, 2.6mA
Voltage - Supply:	0.9 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-VFSOP (0.091", 2.30mm Width)
Supplier Device Package:	US8
Base Part Number:	7NP34

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Control and Signal NC7NP34K8X is one of Texas Instruments’ logic level FETs, one of many chip set solutions identical for high power applications and the integration of external logic and control elements. This chip set utilizes logic devices that have a common enabling buffer circuit, as well as power switching device, a logic driver and a receiver. The use of NC7NP34K8X as a device in the control circuit or power switch is one of its main features, as this particular chip set is designed to provide an inexpensive, reliable and stable solution for interfacing and controlling external components.The topology of this chip set starts with the enabling buffer. This circuit is designed to provide sufficient current and voltage drive for the logic device, as well as for the power switching device. The logic device is connected to the enabling buffer through a pair of clamps, and the power switching device is connected to the enabling buffer through another pair of clamps. The output of the enabling buffer is then fed to the logic device, and once the enabling buffer is enabled, the logic device can then be energized.The power switching device is responsible for controlling the power to the external components. This device can either act as a switch, or can be programmed to provide dynamic control of the power to the components. This device is typically connected to the logic device through a programmable logic interface, and this allows the logic device to control the power to the external components.Finally, the logic driver is responsible for providing the logic signals to the outside components. This signal can either be a digital, analog, or a hybrid combination of the two. The signal is generated from the logic device, and then sent to the outside components through the signal interface. This signal can be used to control the logic level of the components, or can be used for data transmission, or for any other purpose for which logic signals are necessary.The NC7NP34K8X chip set is one of the most popular solutions for high power applications such as controlling motors, power supplies, and other electronic circuitry. This chip set provides an inexpensive, reliable, and stable solution for the interfacing and control of external components. The design of the chip set is quite robust, and is able to provide the necessary logic, power switching, and logic communication capabilities that are necessary for controlling external components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description