NC7SZ126P5X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NC7SZ126P5X is a low-voltage, CMOS-voltage level translator that can be used in a variety of applications. The device has two different channels, each with two inputs and two outputs, plus a control signal. The two channels can be used independently, or combined to achieve high voltage level translation when the control signal is enabled.

The NC7SZ126P5X is classified as a logic buffer, driver, receiver, and transceiver. Logic buffers are circuits that serve as an interface between one type of logic signal and another, such as from TTL to CMOS, or from low-voltage differential signaling (LVDS) to standard voltage logic (SVL). Drivers are circuits that provide the strength necessary to reliably drive the load, while receivers are circuits that accept incoming signals from the load and translate them into a logic level suitable for the device. Transceivers are integrated circuits that act both as a driver and a receiver.

The NC7SZ126P5X is a low voltage level translator, which is ideal for power-sensitive applications. It is implemented using a four-channel differential pair architecture that provides a 50% reduction in supply current compared to other single-channel solutions. The two inputs and two outputs provided by the NC7SZ126P5X allow for a wide range of voltage and interface level translation.

The NC7SZ126P5X comes in a Pb-free, 5-pin SC-70 package, and is capable of translating from 1.2V to 3.6V. It has a typical propagation delay of 4.5ns, and can operate over the full industrial temperature range of -40°C to +85°C. The device is optimized for fast switching and minimal noise offering superior performance in applications such as multi-voltage level translation, level detection, and dynamic clocking or handshaking signals.

The NC7SZ126P5X can be used in a variety of applications including embedded systems, digital video and audio processing, digital sensor interfaces, and hand-held communication devices. In addition, the device can be used to convert from higher voltage and high current logic levels to low voltage and low current level, making it ideal for use in power-sensitive applications.

The working principle of the NC7SZ126P5X is relatively simple. The device has two inputs (IN1 and IN2) and two outputs (OUT1 and OUT2). The inputs and outputs have different logic-level voltage thresholds, so the device translates the logic levels from one voltage to another. The control signal enables or disables the device, allowing the level translation to be switched on or off, depending on the requirements of the application.

The NC7SZ126P5X is an ideal choice for applications where space or power constraints limit the use of other level translators, or where quick switching and excellent noise performance are required. Its low-voltage, CMOS-voltage level translation capabilities make it well suited for a wide range of applications, from multi-voltage level translation to dynamic clocking or handshaking signals.

The specific data is subject to PDF, and the above content is for reference