NCN2612BMTTWG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NCN2612Bmttwg is an interface-analog switch designed for special purposes. It is a dual-control single-pole, double-throw switch with a single on/off input. The NCN2612Bmttwg is used to control and isolate a variety of analog and digital signals. The NCN2612Bmttwg operates over a broad frequency range from 0.7v to 5 volts with maximum frequency of 300MHz.

The NCN2612Bmttwg is suitable for applications such as analog and digital signal routing, test and measurement, DClevel sequencing and voltage translation. The NCN2612Bmttwg pin assignment and control logic are designed to meet the requirements of various control systems. It provides high isolation of inputs and outputs, low on-resistance and low power consumption.

The NCN2612Bmttwg is a 0.6V to 5V CMOS switch with two control inputs. The select pin (SEL) controls the on/off state of the switch while the Ground Pin (GND) determines how the switch should operate in an applied voltage environment. The SEL pin is internally connected to the logic circuit and the GND pin is internally connected to the analog circuit. When SEL is connected to VCC (logic high) the switch is in the ON state. When SEL is connected to GND (logic low) the switch is in the OFF state.

The NCN2612Bmttwg also features low power consumption and low on-resistance. It consumes less than 1mW when operating in a 2V to 5V voltage environment, and the on-resistance is typically in the range of 0.5 ohms to 1 ohms. The NCN2612Bmttwg is also capable of operating from 0.7V to 5V voltage environment, and the on-resistance in this range is typically in the range of 0.7 ohms to 1.3 ohms.

The NCN2612Bmttwg is designed to minimize crosstalk and EMI noise. It also has low distortion, power-on inrush protection, and lower propagation delay. The switch also provides excellent isolation of inputs and outputs, as well as protection from ESD, over-current and over-voltage. The NCN2612Bmttwg also features high gain and low distortion, allowing it to reduce input and output noise.

The NCN2612Bmttwg is an excellent choice for applications that require high isolation and low EMI-noise. It is suitable for applications such as analog and digital signal routing, test and measurement, DClevel sequencing and voltage translation. The NCN2612Bmttwg is a cost effective switch with excellent performance characteristics and provides high reliability in various demanding applications.

The specific data is subject to PDF, and the above content is for reference