NCP1200AD40R2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC (Power Management ICs) stands for power management integrated circuits and comprises a wide range of devices and solutions which aim to reduce energy and heat loss while providing power to various loads ranging from circuit boards and motherboards of PCs and laptops to other devices. AC DC converters, offline switchers, and NCP1200AD40R2 are all a part of the PMIC solutions. This article will discuss the application field and working principle of NCP1200AD40R2 AC DC converters.NCP1200AD40R2 is a high-efficiency, non-isolated AC-DC conversion power supply module, based on the topology of SEPIC (Single Ended Primary Inductance Converter), which features output voltage and frequency regulatory, power path control, power factor correction and protection functions. It is particularly suited for low-cost AC-DC converters, point-of-load (POL) applications, motor speed control and power supply modules.The NCP1200AD40R2 AC DC converter has a wide input voltage range of 8-65 Vrms, allowing it to operate in various applications efficiently. It accepts an input voltage from about 120V AC to about 250V AC. Its output power is up to 2.4W, and its output voltage ranges from 0.5V to 12V. It features a high power factor and low output ripple/noise. Compared with traditional SELV/ULV converters, it has a lower component count and footprint, so it offers higher efficiency, low cost and better performance in general.Apart from its application in AC-DC converters, NCP1200AD40R2 can also be used for offline switcher operations, such as PC power supplies, external power supply applications, appliance control and medical equipment. It has adjustable output voltage and frequency, and its output current is up to 400mW. It also has a built-in PFC (Power Factor Correction) circuit, making it suitable for demanding power factor efficiency requirements.The working principle of NCP1200AD40R2 is based on the principles of SEPIC topology. It consists of three main parts: an AC power input, a power conversion section, and an output stage. In the power conversion section, incoming AC power is rectified by an input rectifier to get an intermediate DC voltage. When the voltage becomes high enough, a power MOSFET is switched on to pull the current through the primary winding of a transformer. This current is then used to generate a voltage pulse. The pulse is rectified and used to generate an output voltage.The output voltage is further regulated by a controller, which has several outputs for the primary and secondary sides of the transformer. The output for the primary side is used to control the current through the primary side of the transformer, and the output for the secondary side is used to control the voltage output across its secondary winding. The output is then filtered and passed through the power MOSFET to the output stage, where it is further regulated by a voltage regulator IC.NCP1200AD40R2 AC DC converters are simple, efficient and reliable, making them ideal for applications such as low-cost AC-DC converters, point-of-load (POL) applications, motor speed control and power supply modules. Furthermore, they provide adjustable output voltage and frequency as well as a built-in PFC (Power Factor Correction) circuit, making them suitable for demanding power factor efficiency requirements.

The specific data is subject to PDF, and the above content is for reference