NCP380HMU05AATBG

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	NCP380
Supplier Device Package:	6-UDFN (2x2)
Package / Case:	6-UDFN Exposed Pad
Operating Temperature:	-40°C ~ 125°C (TJ)
Fault Protection:	Current Limiting (Fixed), UVLO
Features:	Slew Rate Controlled, Status Flag
Input Type:	Non-Inverting
Rds On (Typ):	55 mOhm
Current - Output (Max):	2.1A
Series:	--
Voltage - Load:	2.5 V ~ 5.5 V
Interface:	On/Off
Output Type:	P-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Active
Packaging:	Cut Tape (CT)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Management Integrated Circuit (PMIC) is an integrated circuit designed to provide efficient power management for electronic devices, from relatively small electronic devices such as personal digital assistants (PDAs) and smartphones to large industrial or automotive systems. PMICs typically manage the primary power rail within a system and may manage external interface power rails.PMICs are often used to manage power sequencers such as powering up subsystems and detecting, regulating and managing power of components. PMIC may manage one or multiple control inputs, such as voltage level control, temperature control, or processor core power control. Power Distribution Switches, also known as PDs, are used to provide power to multiple devices, often within a subsystem of a larger system. They manage the power currents that are delivered to different devices, and they can be configured to deliver power to each device based on specific parameters. PDs are typically used in applications such as digital systems where both on-off and regulated power need to be managed and distributed. They are also typically integrated with power management and control systems such as clock generators and voltage control modules, allowing the PDs to be programmed and enabled to provide power to different devices at precise intervals. The NCP380HMU05AATBG is a Powerscape™ family Power Distribution Switch (PD) designed for mid-to-low power applications. The NCP380HMU05AATBG offers a wide range of power supply voltages with precise voltage management capabilities. The switch can deliver up to 1.2A output current with low dropout voltage (LDO). The PD can be programmed to deliver power to multiple devices with accurate timing and is designed for applications such as automotive, industrial, networking, and medical.The NCP380HMU05AATBG’s application field encompasses a wide range of option, including automotive, industrial, networking, and medical. Automotive applications typically require PDs to be able to manage power current, voltage and temperature, while industrial applications may require additional performance characteristics, such as: precise current distribution, fault protection, and improved efficiency. The NCP380HMU05AATBG offers features such as a 3-state control input, which provides a level of protection against short circuit and over-current, as well as fault protection.The NCP380HMU05AATBG’s working principle relies heavily on the integrated charge pump module, voltage-mode controller and LDO. The integrated charge pump module provide an efficient, low-current power supply solution for delivering currents up to 1.2A. As the voltage to the PD increases, the output voltage be increased by the voltage-mode controller, providing a precise power management method. The LDO helps to ensure that the current delivered to the device is consistent and reliable, as the higher input voltage is converted to a regulated output voltage.In conclusion, the NCP380HMU05AATBG is a highly integrated power management integrated circuit (PMIC) designed for applications such as automotive, industrial, networking and medical. The PD offers precise voltage management capabilities along with multiple short-circuit and over-current protection features, thanks to its charge pump module, voltage-mode controller, and LDO. With its wide range of applications and efficient power management capabilities, the NCP380HMU05AATBG is an ideal solution for mid-to-low power applications in a variety of industries.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description