NCP630GD2TG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NCP630GD2TG is a low-input-voltage, low-dropout (LDO) linear regulator that provides a fixed output voltage of 2.75V with only 0.22V maximum dropout voltage (for the maximum load specified). It is designed for applications with low power, low quiescent current, and load transient requirements. The device has a fast start-up time, low output voltage ripple, and a wide input voltage range.

The device also has a low output impedance that allows it to respond quickly to load transients, while the wide-bandwidth control loop provides fast loop response. The wide-bandwidth control loop also reduces the noise sensitivity of the device so that the output voltage remains stable even when subjected to input noise.

The NCP630GD2TG features a wide input voltage range of 2.3V to 5V, low quiescent current of 1.9mA (at maximum load), and a low input offset voltage of less than 250mV. It also offers excellent line and load transient response with a maximum 7.3% dropout voltage at 1A load current. The device is available in TSSOP-14 package and is specified over a wide temperature range from -40°C to 85°C.

The NCP630GD2TG is especially suitable for low input voltage, low quiescent current, and low dropout voltage applications, such as portable electronic products, battery powered systems, and applications requiring a constant 2.75V output voltage. It is also suitable for circuits requiring remotely located output voltage adjustment, such as wireless modules and digital still cameras.

The NCP630GD2TG can also be used in automotive and industrial applications, where low input voltage and low quiescent current requirements together with high transient voltage regulation and switch frequency stability are essential. The device is also suitable for applications requiring a stable output voltage over a wide temperature range, such as automotive entertainment systems and motor controls.

The working principle of the NCP630GD2TG is based on a simple circuit consisting of a series pass regulator, a current sink (or sink resistor), and a voltage error amplifier. The pass regulator consists of two MOSFETs, an NMOS and a PMOS, which act as a high-current switch between the input and the output of the regulator. The current sink is used to limit the maximum current that can be drawn from the output of the regulator. The voltage error amplifier is used to detect any deviation in output voltage from the desired value, and the output of the amplifier is then used to control the operation of the two MOSFETs.

When the output voltage is lower than the desired value, the voltage error amplifier will adjust the gate of the NMOS device so that the pass regulator is turned on at a higher current, thus raising the output voltage. Similarly, when the output voltage is higher than the desired value, the voltage error amplifier will adjust the gate of the PMOS device so that the pass regulator is turned off, thus decreasing the current flow.

In summary, the NCP630GD2TG is a low-input-voltage, low-dropout linear regulator capable of providing a fixed output voltage of 2.75V with a maximum 0.22V dropout voltage. It has a wide input voltage range of 2.3V to 5V, a quiescent current of 1.9mA (at maximum load), a low-input offset voltage of less than 250mV, and an excellent line and load transient response with a maximum 7.3% dropout voltage at 1A load current. Moreover, the wide-bandwidth control loop ensures that the device remains stable even under input noise conditions. Therefore, the NCP630GD2TG is suitable for applications requiring a remotely located output voltage adjustment as well as those that require a stable output voltage over a wide temperature range.

The specific data is subject to PDF, and the above content is for reference