NCP7812BTG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NCP7812BTG is a linear regulator designed to operate over a wide voltage range, from 3.3V to 18V, and to provide plenty of output current, up to 500mA. It is a low noise, low dropout voltage (LDO) device that is ideal for a variety of applications in power-sensitive portable instruments and RF circuits. This article will provide an overview of the application field and working principle of the NCP7812BTG.

Application Field

The NCP7812BTG is a general purpose low-noise linear regulator, suitable for a wide range of applications. Its wide voltage range makes it ideal for use in applications where 3.3V to 18V power supply levels might be encountered. It can be used to power an SoC, voltage references, cable TV, digital audio, automotive audio, Bluetooth radio and other power-sensitive consumer electronics.

The NCP7812BTG features an output voltage accuracy of +/-1.3%, which makes it ideal for powering microcontrollers, ASICs and microprocessors. It is an efficient device, with a typical quiescent current of only 9mA, and is made with high-reliability CMOS processes that guarantee excellent performance over the lifetime of the device. It also features a built-in power switch to enable power savings during reduced load conditions and a power-good output signal to provide system monitoring.

Working Principle

The NCP7812BTG is a low-dropout voltage regulator, meaning the output voltage is maintained even with a low input voltage (LDO). This is accomplished by utilizing a feedback circuit that monitors the output voltage and adjusts the amount of current flowing through the internal current-source and load transistor. The load transistor is an N-Channel MOSFET transistor and is responsible for the current flow from the input to the output. The current source is a P-channel MOSFET transistor and it is responsible for the current flow from the input to the ground. This current source can come in a few different forms, but typical implementations will be a fixed current source or a variable current source.

The NCP7812BTG also features a built-in power switch, which is used to enable power savings when the load current drops below a certain value. This is done by turning off the power switch, which in turn shuts down the current source and GND transistor, thereby disabling current flow and saving power. This power switch can be enabled/disabled via an external control pin. By disabling the power switch, the output voltage is briefly unloaded, resulting in an even lower quiescent current and improved power consumption.

The NCP7812BTG also features an integrated voltage supervisor circuit. This circuit monitors the output voltage and will send a power-good signal to the system controller to indicate that the device is in regulation and operating normally. If the output voltage drops below a certain threshold, the power-good signal is disabled and the NCP7812BTG shuts down, which prevents the system from operating at incorrect levels.

In summary, the NCP7812BTG is a low-noise, low-dropout voltage regulator with a wide range of applications. Its wide input voltage range, excellent output accuracy, low quiescent current and integrated voltage supervision make it an ideal choice for portable and power-sensitive applications.

The specific data is subject to PDF, and the above content is for reference