NFE61HT681D2A9L Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electro-magnetic interference (EMI) and radio frequency interference (RFI) filters are components used to reduce the unwanted signals generated by high speed switching circuits, power line noise, motor drives, and other types of noise sources. The NFE61HT681D2A9L is a specific type of EMI/RFI filter, which falls into the category of LC and RC networks.

An LC network describes an electrical network that consists of a inductor (L) and a capacitance (C). They are connected together in either a series or parallel configuration to create a low pass, high pass, band pass, or band stop filter. In a low pass filter, the inductor typically blocks the higher frequency components of the signal while allowing the low frequency components to pass through. This type of filter is used to reduce high frequency noise generated from a power supply, various motors, or other high speed switching circuits.

A RC network is similar to an LC network in that it also consists of a inductor (L) and a capacitance (C). In a RC network, the resistor (R) is also included in the circuit. These components are typically connected together in a series or parallel configuration in order to create a low pass, high pass, band pass, or band stop filter. Like an LC network, in a RC network an inductor typically blocks the higher frequency components while the resistor blocks lower frequency components from passing through the network.

The NFE61HT681D2A9L is an example of an EMI/RFI filter that falls into both LC and RC network categories. It is a low pass filter that is designed to reduce high frequency noise such as that generated by a power supply, various motors, or other high speed switching circuits. It uses an inductor and a capacitance to create a circuit that blocks higher frequency components, while allowing lower frequency components to pass through.

The NFE61HT681D2A9L is a very effective and efficient filter for noise reduction. It is designed to provide protection while still allowing the desired frequencies to pass through the filter. Its small size makes it ideal for applications where size is a factor. The ability of this filter to reduce high frequency noise while still allowing low frequency noise signals to pass through makes it a great choice for any application that requires protection from noise generated by high speed switching circuits, power line noise, and other sources of EMI/RFI.

The specific data is subject to PDF, and the above content is for reference