NJD1718T4G Discrete Semiconductor Products |
|
Allicdata Part #: | NJD1718T4GOSTR-ND |
Manufacturer Part#: |
NJD1718T4G |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | ON Semiconductor |
Short Description: | TRANS PNP 50V 2A DPAK |
More Detail: | Bipolar (BJT) Transistor PNP 50V 2A 80MHz 1.68W Su... |
DataSheet: | NJD1718T4G Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Transistor Type: | PNP |
Current - Collector (Ic) (Max): | 2A |
Voltage - Collector Emitter Breakdown (Max): | 50V |
Vce Saturation (Max) @ Ib, Ic: | 500mV @ 50mA, 1A |
Current - Collector Cutoff (Max): | 100nA (ICBO) |
DC Current Gain (hFE) (Min) @ Ic, Vce: | 70 @ 500mA, 2V |
Power - Max: | 1.68W |
Frequency - Transition: | 80MHz |
Operating Temperature: | -65°C ~ 150°C (TJ) |
Mounting Type: | Surface Mount |
Package / Case: | TO-252-3, DPak (2 Leads + Tab), SC-63 |
Supplier Device Package: | DPAK |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
NJD1718T4G is a transistor, specifically a bipolar junction transistor (BJT). A BJT is a type of transistor, often referred to as a \'current switching\' device because of its ability to control the flow of current between two nodes. In general, there are three types of BJTs - n-type, p-type, and depletion type. The NJD1718T4G is a single BJT, namely a n-type, which has three layers - an n-type layer, a p-type layer, and a mixed layer - and two junction points. The n-type layer connects two electrons, while the p-type layer connects two holes.
The NJD1718T4G has a variety of applications because of its ability to control current efficiently and quickly. Its primary use is as an amplifier, or a switch that can be used to increase the power of a signal. It can be used in a variety of amplifiers, such as audio and RF amplifiers, as well as power amplifiers, and can be used for video amplifiers as well. In addition, it can be used as a switch for digital logic systems, and as an active filter for analog and digital circuits.
The NJD1718T4G operates on the same basic principle as other BJTs, and is based on the flow of electrons from the n-type layer to the p-type layer. This flow of electrons is activated by a positive voltage (usually the base voltage) applied to the third, or mixed, layer of the transistor. This causes the electrons to flow through the transistor, creating a current between the emitter and the collector. The more voltage that is applied to the base, the more current that is allowed to flow, thus creating a current amplification.
The transistor can be used in a variety of different configurations, such as common emitter, common base, and common collector, depending on the needs of the circuit. It can be used both in linear applications and in switching applications, allowing for a wide range of uses. For example, in a common-emitter configuration, the transistor can be used as an amplifier or a switch, or in common-base configuration, it can be used as an active filter.
Overall, the NJD1718T4G is a versatile and powerful transistor, with a wide range of applications. It is most commonly used as an amplifier or a switch, but can also be used for video amplifiers, as an active filter, and for digital logic systems. It is designed for use in a variety of circuit configurations, allowing for flexibility and customization.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
NJD1718T4G | ON Semicondu... | -- | 1000 | TRANS PNP 50V 2A DPAKBipo... |
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
TRANS PNP DARL 30A 120V DIEBipolar (BJT)...
TRANS PNP DARLINGTON DIEBipolar (BJT) Tr...
TRANS GENERAL PURPOSE TO-218Bipolar (BJT...
TRANS PNP 140V 1ABipolar (BJT) Transisto...
TRANS NPN 700V 3A I2PAKBipolar (BJT) Tra...