NJG1506R-TE2 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Switches are key stop components of multiplexer circuits, and their performance directly affects the stability of the entire system. The NJG1506R-TE2 is an RF Switch developed by Minicircuits. It is a double-pole double-throw reflective power switch which utilizes GaAs-FET technology with low insertion loss and high isolation, making it suitable for a variety of applications.

The NJG1506R-TE2 uses a high frequency double-pole double-throw reflective switch which consists of two input/output ports connected by beam shaping components. The two ports are labeled as Tx and Rx, respectively. In addition, there are two control inputs, labeled Vcc and In. The Vcc input is used to power the device and supply it with the necessary input bias voltage. The In input is used to control the operation of the RF switch and can be used in conjunction with logic level control signals.

The NJG1506R-TE2 has excellent performance parameters such as 3-dB bandwidth of 90 MHz, minimum isolation of 60 dB, and insertion loss of 1.7 dB. It has a stand-by current of less than 5 μA. It is rated for a power handling capacity of up to 5 W, making it suitable for many high power applications. It also features a wide operating temperature range from -40°C to 85°C, making it an ideal choice for use in harsh environments.

The NJG1506R-TE2 has numerous applications in the field of communication and RF system designs such as wireless data links and base station amplifiers. It can also be used as a switching element for broadband multiplexers and receivers. For multiplexers, it can be used to switch between multiple channels, and for receivers, it can be used to switch between multiple antenna elements. It can also be used in transceivers for switching between transmit and receive modes.

The NJG1506R-TE2 works on the principle of a reflective switch. It uses the difference in impedance between the Tx and Rx ports to reflect power and control the flow of signal. The input signal is applied to the Tx port, and when the control signal on the In port is at high logic level, the signal is reflected back from the Rx port to the Tx port. When the control signal at the In port is at a low logic level, the signal is allowed to pass through from the Tx port to the Rx port.

The NJG1506R-TE2 is an excellent choice for design engineers who require a reliable, high performance RF switch. The device is inexpensive, has good isolation, and has good power handling capacity. With its wide operating temperature range and wide bandwidth, it is suitable for many applications in the field of communication and RF system.

The specific data is subject to PDF, and the above content is for reference