Allicdata Part #: | NJM8202V-TE1-ND |
Manufacturer Part#: |
NJM8202V-TE1 |
Price: | $ 0.49 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | NJR Corporation/NJRC |
Short Description: | IC OPAMP GP 10MHZ RRO 8VSP |
More Detail: | General Purpose Amplifier 2 Circuit Rail-to-Rail 8... |
DataSheet: | NJM8202V-TE1 Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 0.44651 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Amplifier Type: | General Purpose |
Number of Circuits: | 2 |
Output Type: | Rail-to-Rail |
Slew Rate: | 3.5 V/µs |
Gain Bandwidth Product: | 10MHz |
Current - Input Bias: | 100nA |
Voltage - Input Offset: | 1mV |
Current - Supply: | 4mA |
Voltage - Supply, Single/Dual (±): | 2.5 V ~ 14 V, ±1.25 V ~ 7 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Package / Case: | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) |
Supplier Device Package: | 8-VSP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The NJM8202V-TE1 is a quad operational amplifier from New Japan Radio (NJR). It is well known for its high performance and low noise level. This versatile IC can be used for various applications and it is especially suitable for high-speed, low-noise and low-distortion signal amplification. The NJM8202V-TE1 can be categorized as a linear amplifier, instrumentation amplifier, operational amplifier (Op-Amp), buffer amplifier and pre-amplifier.
Applications
NJM8202V-TE1 is an ideal choice for applications requiring high-fidelity accuracy, such as audio frequency amplifiers, phono amplification, active filters, and audio signal processing systems. It can also be used in medical and industrial high-precision analog signal control systems. The low-noise and low-distortion features make it suitable for signal transmission in electronic communications systems, such as fiber-optic transmission systems and cell phone base stations. It is also used in precision signal conditioning circuits, such as temperature and pressure sensors, and analog-digital converter (ADC) circuits.
The NJM8202V-TE1 can be used in an array of power amplifiers, signal transmitters, signal receivers, equalizers, mixer stages, sine-wave signal modifiers and signal splitters. It can be used in precision signal control to support automatic signal detection and frequency selection, as well as other sound signal monitoring applications. This IC is also suitable for filter circuits and instrumentation amplifiers.
Working Principle
The NJM8202V-TE1 is an integrated circuit consisting of four independent amplifying elements and a common power supply (VCC). It provides a high input impedance via differential input stages, and a low output impedance with complementary push-pull outputs. It uses proprietary high-fidelity low-noise circuitry to ensure low distortion, high slew rate and low-noise performance.
The operating voltage range of the NJM8202V-TE1 is ±1.8V to ±18.0V. This allows the OP Amp to operate in multiple applications under either bipolar or single-ended power supply configuration. Its on-chip trimming resistors provide flexible gain settings, from unity to a maximum of 1450. It can also be used in a high-power mode, with a maximum output voltage of ±50V.
The NJM8202V-TE1 has a low noise figure of 2.5nV/√Hz, a low distortion of -112 dB, and a high slew rate of 57V/μs, making it an ideal choice for precision signal amplification. This IC has a wide frequency response range from DC to audio frequencies, DC coupled dual outputs, high CMRR and high common mode rejection. All these features make it an ideal choice for applications that require high precision and low noise performance.
Conclusion
The NJM8202V-TE1 is a high-performance quad operational amplifier with high-fidelity accuracy and low-noise performance. It can be used in a variety of applications requiring precision signal amplification, including audio frequency amplifiers, phono amplification, active filters, audio signal processing systems, medical and industrial high-precision analog signal control systems, signal transmission, precision signal conditioning circuits, power amplifiers, signal transmitters, signal receivers, equalizers, mixer stages, sine-wave signal modifiers and signal splitters.
The NJM8202V-TE1 provides excellent performance due to its low noise figure, low distortion, high slew rate, wide frequency response range and its high CMRR and common mode rejection. The NJM8202V-TE1 allows for flexible gain settings and is applicable to either bipolar or single-ended power supply configurations, making it an ideal choice for high-precision, low-noise signal amplification applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
NJM8202E-TE1 | NJR Corporat... | 0.49 $ | 1000 | IC OPAMP GP 10MHZ RRO 8EM... |
NJM8202V-TE1 | NJR Corporat... | 0.49 $ | 1000 | IC OPAMP GP 10MHZ RRO 8VS... |
NJM8202RB1-TE1 | NJR Corporat... | 0.49 $ | 1000 | IC OPAMP GP 10MHZ RRO 8TV... |
NJM846DL3-05-TE1 | NJR Corporat... | 0.0 $ | 1000 | IC REG LINEAR 5V 800MA TO... |
NJM8801E | NJR Corporat... | 1.71 $ | 1000 | IC OP AMP GP 15MHZ 8SOPGe... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...