NL17SV16XV5T2G Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NL17SV16XV5T2G is a logic device that falls under the realm of logic buffers, drivers, receivers, and transceivers. It is a part of the Low Voltage Advanced Logic (LVAL) family from National Semiconductor, designed to meet the requirements of low voltage and low power applications. This device is designed to provide both power saving and high-speed operation.

The NL17SV16XV5T2G provides four 16-bit transceivers with driver and receiver, one 16-bit LVT register, one 16-bit LVT latch, and a bus-hold. It operates with a power supply ranging from 1.65-3.6 V, with the I/O voltage levels ranging from 1.65-5.5 V. This device is capable of running at a maximum of 6 V in both the I/O and supply voltages.

The NL17SV16XV5T2G is designed as an easy-to-use I/O device for low voltage and low power applications. It is used for interfacing low voltage microprocessors, DSPs, CPUs, and ASICs to standard 3V and 5V logic levels. This device is commonly utilized in low power applications, including serial communication, networking, data acquisition, and more. Additionally, it is suitable for applications requiring high speed operation such as video playback and streaming.

The NL17SV16XV5T2G has several key features. It has up to five selectable I/O ports, along with support for up to four independent devices. The device also has an integrated bus-hold which eliminates the need for external pull-up resistors. The device also features open-drain active-low outputs, as well as an I/O isolation voltage level that can be adjusted. Finally, it features a low power consumption of 150 mW and a low operating current of 20 uA.

The NL17SV16XV5T2G works according to the logic protocol known as LVT. LVT stands for Low Voltage Transmitting, and is based on two logical variables referred to as “active” and “inactive”. The “active” variable denotes a logical ‘1’, while the “inactive” variable denotes a logical ‘0’. The LVT protocol is designed to provide a low power, low voltage method of communication between devices. It utilizes an I/O detection circuit to detect when logical variables have changed and then level shifts the detected logic to provide the appropriate voltage levels.

In addition to its LVT operation, the NL17SV16XV5T2G can also be used as a bus-holding device. The bus-hold feature allows the device to latch the last valid state of the I/O signals and retain that state until valid data is present on the I/O pins. This allows the device to maintain a logical input/output relationship, even when the system is not being used.

In conclusion, the NL17SV16XV5T2G can be classified as a logic device that falls under the realm of logic buffers, drivers, receivers, and transceivers. It is a part of the Low Voltage Advanced Logic family from National Semiconductor, and is designed to provide both power saving and high-speed operation. It is commonly used in low power applications, such as serial communication, networking, data acquisition, and more. Additionally, it features an integrated bus-hold which eliminates the need for external pull-up resistors, and supports both LVT and bus-hold operations.

The specific data is subject to PDF, and the above content is for reference