NLAS4684MR2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The NLAS4684MR2G is an analog switch integrated circuit specifically designed for multipoint communications. This device provides a low on-resistance, high switching speeds, and a wide range of operating voltages. This makes it suitable for use in applications such as switching analog signals between different points in a circuit, as well as for multiplexing and demultiplexing operations. It can also be used for filtering out low-frequency noise from the signal inputs.

The device is made up of four independent analog switches, which each have a single input and output. The switches are capable of operating up to a maximum voltage of 5V and at switching speeds of up to 10MHz. The maximum on resistance of each switch is of 16 ohms. The device also features low control-signal input levels, which allows it to be controlled by TTL and CMOS logic levels.

The working principle of the NLAS4684MR2G is relatively simple. Its four switches can be controlled separately, allowing a single signal to be switched between different points. For example, a signal can be switched between two input points A and B and two output points C and D. When the control signal for a single switch is high, then the input signal is connected to the output and vice versa. The device can also be used for multiplexing and demultiplexing applications. In a multiplexing application, the device can be used to switch an input, analog signal between multiple output signals. In a demultiplexing application, the device can be used to switch multiple input signals to a single output.

The NLAS4684MR2G is an ideal solution for applications that require a low on-resistance, high switching speeds, and wide range of operating voltages. It is most suitable for analog signal switching and multiplexing/demultiplexing applications. The device can be used to filter low-frequency noise when switching analog signals, as well as to multiplex and demultiplex signals with high speeds and low on-resistances. Additionally, the device can be controlled using TTL and CMOS logic.

The specific data is subject to PDF, and the above content is for reference