NMP1K2-EEK##E-01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC converters are used to convert electrical power from alternating current (AC) into direct current (DC). The NMP1K2-EEK##E-01 is a high-efficiency, single-output, switch-mode AC-DC converter, capable of delivering up to 1500 watts of output power. It is a suitable solution for both single-phase applications such as industrial equipment, and three-phase applications such as solar applications.

The NMP1K2-EEK##E-01 is designed to provide reliable, efficient, and cost-effective power conversion for applications ranging from low- to medium-power levels. It features an ultra-wide range input voltage of 90 to 264 volts AC, making it suitable for universal input. The NMP1K2-EEK##E-01 provides a wide input range that allows for flexibility in voltage selection and is capable of withstanding a line-to-line short-circuit and surge faults for continuous operation.

The NMP1K2-EEK##E-01 provides an output voltage of 48 VDC and is capable of delivering up to 1500 watts of output power. It also features over-temperature, over-load, and over-voltage protection for improved system reliability and safety. The NMP1K2-EEK##E-01 operates at an efficiency of up to 92% and has a temperature range of -40°C to +85°C, making it suitable for use in a wide variety of applications.

The NMP1K2-EEK##E-01 is based on a switched-mode Power Factor Correction (PFC) topology, with a broadband frequency modulation of the primary converter operating in CCM (Continuous Conduction Mode). This topology enables a high-efficiency operation with no low-frequency harmonics. The PFC provides good EMI performance with very low EMI emissions.

The secondary side of the NMP1K2-EEK##E-01 is based on a synchronous forward converter and operates in CCM. This eliminates the need for an input electrolytic capacitor, resulting in greater efficiency and higher power density. The converter is designed to operate with an input of up to 800 watts, enabling a wide range of applications.

Furthermore, the NMP1K2-EEK##E-01 is designed with a low ripple and noise specification with a 12 Volt/Division scale less than 1 Vpp, allowing it to meet all applicable standards and providing reliable performance for sensitive applications. The converters also feature over-voltage, over-temperature, and over-current protection to ensure safety and reliability.

The NMP1K2-EEK##E-01 is a reliable, efficient, and cost-effective AC-DC converter solution for a wide variety of applications, ranging from low- to medium-power levels. Its low ripple and noise specification makes it suitable for sensitive applications, while its wide input range allows for flexibility in voltage selection and its PFC topology enables high-efficiency operation with no low-frequency harmonics. Its secondary side forward converter operation eliminates the need for an expensive input electrolytic capacitor, resulting in greater efficiency and higher power density.

The specific data is subject to PDF, and the above content is for reference