NPC-1210-030D-3-L

Pressure Sensors, Transducers are commonly used in a wide range of applications, ranging from aerospace and automotive engineering to medical instrumentation. A pressure transducer, also commonly known as a pressure sensor, is typically a transducer used to measure changes in pressure relative to the atmospheric pressure. The NPC-1210-030D-3-L is a digital pressure transducer designed for measuring pressure in both laboratory and industrial markets.

The design of the NPC-1210-030D-3-L pressure transducer is based on a Wheatstone bridge circuit. It utilizes a straight forward pressure inlet and outlet to measure differential pressure with two internal transducers or ‘sensors’. The automatic calibration system of NPC-1210-030D-3-L is based on advanced algorithms and allows for both one-point and two-point calibration. As for the physical design, the sensor is embedded in a stainless steel housing, sealed with an o-ring. The housing also protects the internal components from any damage due to excessive moisture or extremes in temperature.

NPC-1210-030D-3-L is suitable for a wide range of applications in both laboratory and industrial settings, ranging from pressure measurements in HVAC applications, process control applications, and industrial process automation. It is also suitable for measuring hydraulic, pneumatic, and other gases in any system where pressure is a primary parameter. In addition, NPC-1210-030D-3-L sensor can also be used for pressure monitoring of pumps, compressors, and other equipment. The device offers a resolution of 0.1 mPa (milli-bar) a pressure range of 0-1.2MPa (0-3 bar) and accuracy of ±0.25% over the full range.

The working principle of NPC-1210-030D-3-L pressure transducer is based on the Wheatstone bridge circuit. This circuit is composed of four resistive sensors and a bridge amplifier. The pressure is applied to the two pressure inlets and on the two resistive sensors. The output voltage of the bridge is then amplified by the bridge amplifier. This amplified signal is sent to the output pins of the sensor. The working range of the NPC-1210-030D-3-L can be set by adjusting the bridge circuit and the gain of the amplifier. The amplified signal can be further processed by an analog to digital converter (ADC) to obtain an accurate measurement of pressure.

To conclude, NPC-1210-030D-3-L is a digital pressure transducer that can be used for a variety of applications. It is based on a Wheatstone bridge circuit and has a resolution of 0.1 mPa and a pressure range of 0-1.2MPa. The device also offers an accuracy of ±0.25% and can be calibrated for one-point and two-point measurements. It is suitable for measuring hydraulic, pneumatic, and other gases in any system where pressure is a primary parameter.