NRF24L01P-T

Power - Output:	0dBm
Package / Case:	20-VFQFN Exposed Pad
Operating Temperature:	-40°C ~ 85°C
Current - Transmitting:	7mA ~ 11.3mA
Current - Receiving:	12.6mA ~ 13.5mA
Voltage - Supply:	1.9 V ~ 3.6 V
Serial Interfaces:	SPI
Memory Size:	--
Sensitivity:	-94dBm
Series:	--
Data Rate (Max):	2Mbps
Frequency:	2.4GHz
Modulation:	GFSK
Protocol:	--
RF Family/Standard:	General ISM > 1GHZ
Type:	TxRx Only
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

NRF24L01P-T is a transceiver IC from Nordic Semiconductor that works on the 2.4 GHz radio frequency band. It is a high-performance and low-cost IC intended for wireless personal area network (WPAN) applications. The NRF24L01P-T supports hardware packet addressing, bidirectional communication, excellent power efficiency, and auto-acknowledgement. This transceiver IC can be used in a variety of radio frequency applications, such as in coding systems, remote control applications, home automation systems, and robotic applications.

Application Field:

The NRF24L01P-T transceiver IC is a popular choice for radio frequency applications, especially in wireless personal area networks. The chip supports hardware packet addressing, bidirectional communication, multiple types of communication, excellent power efficiency and auto-acknowledgement. It is suitable for use in various coding systems, remote control applications, home automation systems, wireless sensors and robotics.The NRF24L01P-T supports bit rates of up to 2 Mbps, making it suitable for low-rate data transmissions. The chip has excellent power efficiency, making it suitable for applications such as mobile phones, laptops, and wearable devices. It also supports multiple antennas to ensure a fast and reliable connection in any environment.

Working Principle:

The NRF24L01P-T transceiver IC is an RF transceiver IC that transmits and receives data over a radio frequency link. It has a 32-bit controller, which is responsible for handling the data communication between the NRF24L01P-T and other modules. The NRF24L01P-T follows a half-duplex communication protocol. This means that data is sent and received in alternating cycles. The data is divided into packets, and each packet contains alternating sender and receiver addresses. The NRF24L01P-T uses a Carrier Sense Multiple Access (CSMA) protocol to prevent collisions between multiple devices. If two or more devices try to send data at the same time, the NRF24L01P-T will detect the collision and wait for the other device to finish sending its data before it can send its own data. The NRF24L01P-T also supports automatic acknowledgment of packets, so the receiving device can confirm that the data was received successfully.The NRF24L01P-T is powered by a 3.3V supply and consumes little power, usually less than 10mA. The chip supports a wide range of operating frequencies from 2.400 GHz to 2.525 GHz and supports the most common modulation schemes, such as GFSK (Gaussian Frequency Shift Keying), OOK (On-Off Keying), and MSK (Minimum Shift Keying).

Conclusion:

The NRF24L01P-T transceiver IC is a popular choice for radio frequency applications, especially wireless personal area networks. It offers excellent power efficiency, bit rates up to 2 Mbps, multiple types of communication, automatic acknowledgment of packets, and wide operating frequency range. The chip is highly reliable and robust, making it suitable for various applications, such as in coding systems, remote control applications, home automation systems, and robotics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description