NS16C2552TVAX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UARTs (Universal Asynchronous Receiver Transmitter) are widely used in many applications, and the NS16C2552TVAX/NOPB is no exception. This device is a low-power, high-performance UART controller that supports asynchronous RS-232, forward and backward data conversion, and RS-485 control. It is designed to interface with microprocessors, and other peripheral devices, and to enable efficient asynchronous data transfer.

The NS16C2552TVAX/NOPB has two 16-bit internal registers that can be used to program the UART\'s operation and settings. The device can be configured to operate in either asynchronous or synchronous mode, which means that it can be used in both point-to-point and multipoint applications. The device supports data rates from 300 to 115.2K bps, and supports 8 or 9-bit data framing. It also has a built-in FIFO buffer that can store up to 64 bytes of data for rapid communication.

The UART controller includes protections for both data and control line I/O operations. It supports error detection, which allows the host processor to detect and act on any errors that might occur during data transmission. The protection also includes an interrupt logic that can be used to notify the host processor when data transmission has been completed. In addition, it supports an ECHO mode that allows for full-duplex communication. Without this ECHO mode the device must operate in half-duplex mode.

The NS16C2552TVAX/NOPB is typically used in applications that require communication between two or more microprocessors or between a microprocessor and a peripheral device. It enables a high-speed link between the two devices, and allows data to be transmitted in both directions without the need for complex cabling. Some of the potential applications for the UART include telephone systems, industrial equipment, touch screens, and more.

The working principle of the NS16C2552TVAX/NOPB is relatively straightforward. It consists of two main components: the interface logic, and the transmitter and receiver logic. The interface logic receives control signals from the host processor and generates a control signal to the transmitter and receiver logic. The transmitter and receiver logic control the direction of data flow, and provide the signals needed for data transmission. When data is transmitted, the transmitter and receiver logic convert the data bits into parallel binary signals, which are then sent to the receiving device.

Data can also be transmitted in reverse, from the receiving device back to the transmitting device. In this case, the receiving device must provide the data bits in parallel form. The UART then converts these signals back into serial data, and the transmitter logic sends the data to the host processor. The interface logic is also responsible for controlling the connection between the host processor and the peripheral device, and generating interrupts when data is received or transmitted.

The NS16C2552TVAX/NOPB is a powerful and versatile UART controller that can be used in a variety of applications. It offers high performance and low power consumption, and its simple design and programming makes it an ideal choice for many applications. With its robust protection and reliable data transmission, the UART is a reliable and cost-effective solution for connecting microprocessors and their peripheral devices.

The specific data is subject to PDF, and the above content is for reference