NWW5JT1K20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole Resistors are used to resist the flow of current in an electric circuit. The NWW5JT1K20 is an example of this type of resistor, and it has a wide range of applications in today’s electronic circuits. In this article, we will discuss the application field and working principle of the NWW5JT1K20 through-hole resistor.

Application Field

The NWW5JT1K20 is a type of through-hole resistor that is used for a variety of applications in the electronic industry. It is commonly used as a current-limiting resistor in order to protect components in a circuit from over-currents or high levels of current. It is also used in printed circuit boards (PCBs) in order to reduce the risks of device malfunction and short-circuiting. Furthermore, the NWW5JT1K20 through-hole resistor is used in the automotive sector and in consumer electronics such as TVs and computers.

Working Principle

The NWW5JT1K20 through-hole resistor works on the basic principle of Ohm’s law. This law states that the current through a resistor is proportional to the voltage applied across it and inversely proportional to the resistance of the resistor. This relationship can be represented by the equation: I = V/R, where I is the current in amperes, V is the voltage in volts, and R is the resistance in ohms. In the case of the NWW5JT1K20 resistor, the resistance is fixed at 1 kilo-ohm (1KΩ). This means that the current through the resistor can be calculated by dividing the voltage across it by 1KΩ. For example, if a 5-volt voltage is applied across the NWW5JT1K20 resistor, the current passing through it will be 5/1000 = 0.005 amperes.

The NWW5JT1K20 also has a maximum power rating of 1/4 Watt (250mW). This means that the maximum current that the resistor can handle is given by the equation: P=I^2 x R, where P is the power rating in Watts, I is the current in amperes and R is the resistance in ohms. For the NWW5JT1K20 resistor, this equation gives us a maximum current rating of 0.5 amperes ( 500mA). Therefore, we can conclude that the NWW5JT1K20 is suitable for applications where the current is less than 0.5 amperes.

Conclusion

In conclusion, the NWW5JT1K20 is a through-hole resistor with a wide range of applications in the electronic industry. It is used as a current-limiting resistor in order to protect components in a circuit from over-currents or high levels of current. It is also used in PCBs in order to reduce the risks of device malfunction and short-circuiting. The working principle of the NWW5JT1K20 resistor is based on Ohm’s law, and it has a maximum power rating of 1/4 Watt (250mW). Therefore, this type of resistor is suitable for applications where the current is less than 0.5 amperes.

The specific data is subject to PDF, and the above content is for reference