NZL6V8AXV3T1G Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes
The NZL6V8AXV3T1G is an axial-leaded unidirectional TVS Diode that is designed to protect electronic equipment from transient voltage overshoots that could cause permanent damage. It features an 8V breakdown voltage, a peak power rating up to 1500W (8/20µs pulse width) and is offered in tape and reel or in bulk packaging.

Application Field
NZL6V8AXV3T1G TVS diode is designed to protect sensitive electronic components and systems against damage caused by high voltage surges, ESD (electrostatic discharge), EFT (electrical fast transients) and lightning induced transients. It is especially well-suited for sensitive analog and digital power circuits and peripherals, as it provides a clip level of 8V with a low 10pF capacitance. These diodes can be used to protect any low-voltage line in any circuit — from AC and DC power lines to signal lines that carry data between digital components. They also provide protection from “ringing” that may occur on lines that carry high-frequency signals.

Working Principle
NZL6V8AXV3T1G TVS Diodes work by clamping the voltage above a certain breakdown voltage when an overvoltage event occurs. When an overvoltage such as ESD occurs, the breakdown voltage is exceeded and the diode begins to conduct current. The current then rises linearly at a rate determined by the forward voltage of the diode, which is typically low. This linear current flow helps to limit the peak voltage of the surge event by dissipating the energy as heat in the diode. This helps prevent any damage to the protected circuits.

Once the over voltage event has passed, the diode turns off and the voltage returns to a normal level. This ensures that the protected components are not subjected to continuous high voltages and minimizes any potential damage. The NZL6V8AXV3T1G TVS Diode can provide many levels of protection, depending on the application. It is well suited for both digital and analog circuits, as it can clamp down voltages that exceed 8V and dissipate the surge energy to prevent damage.

The specific data is subject to PDF, and the above content is for reference