OMAP3525ECBBA

Ethernet:	--
Base Part Number:	OMAP3525
Additional Interfaces:	HDQ/1-Wire, I²C, McBSP, McSPI, MMC/SD/SDIO, UART
Supplier Device Package:	515-POP-FCBGA (12x12)
Package / Case:	515-VFBGA, FCBGA
Security Features:	--
Operating Temperature:	-40°C ~ 105°C (TJ)
Voltage - I/O:	1.8V, 3.0V
USB:	USB 1.x (3), USB 2.0 (1)
SATA:	--
Series:	OMAP-35xx
Display & Interface Controllers:	LCD
Graphics Acceleration:	Yes
RAM Controllers:	LPDDR
Co-Processors/DSP:	Signal Processing; C64x+, Multimedia; NEON™ SIMD
Speed:	600MHz
Number of Cores/Bus Width:	1 Core, 32-Bit
Core Processor:	ARM® Cortex®-A8
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The OMAP3525ECBBA is an embedded microprocessor chip set manufactured by Texas Instruments. It is used in applications that require fast processing, such as gaming consoles, consumer electronics, and industrial applications. The OMAP3525ECBBA is a System-on-Chip (SoC) that integrates numerous key components such as SRAM, Flash Memory Interface, Direct Memory Access (DMA), GPIO and media accelerators into a single package.</p><p>The primary function of the OMAP3525ECBBA is to decode and process audio and video data so that an application is able to decode the data quickly and accurately. The device is also capable of decoding different types of image formats, allowing the application to process multiple images at the same time.</p><p>The OMAP3525ECBBA works by combining a number of components on a single chip, reducing both cost and the size of the application. This chip is particularly well suited for applications that require high processing power and support for multiple image formats. In addition, the SoC provides a wide range of I/O interfaces, making it suitable for a variety of applications.</p><p>The OMAP3525ECBBA has three main components: an ARM Cortex-A8 processor core, an integrated DSP and an on-chip IEEE 802.11g Wi-Fi radio. The ARM Cortex-A8 processor core is a 32-bit processor and is responsible for most of the processing requirements of the chip. The integrated DSP, or Digital Signal Processor, is used to process audio and video data and is capable of decoding various image formats. The 802.11g Wi-Fi radio is responsible for providing wireless networking capabilities to the device.</p><p>The OMAP3525ECBBA uses three different types of memory. The first is the device’s internal SRAM, which is used to store the application’s data. The second is the Flash Memory Interface, which is used to store the operating system and other software. Finally, the Direct Memory Access (DMA) is used to move data to and from the SRAM, Flash Memory Interface and the DSP.</p><p>The OMAP3525ECBBA also has a number of peripherals that can be accessed by the processor. These include GPIO (general purpose I/O), I2C (Inter-Integrated Circuit) and UART (Universal Asynchronous Receiver/Transmitter) that can be used to access other devices. The device also has an array of media accelerators, which are specialized hardware components used to accelerate the task of processing audio and video data.</p><p>The OMAP3525ECBBA is designed to be very energy efficient, allowing the application to run for a long time without consuming too much power. The processor core and DSP are designed to be powered down when idle, and the Wi-Fi radio can be switched off when not in use, further reducing power consumption.</p><p>In summary, the OMAP3525ECBBA is an embedded microprocessor chip set designed for use in applications that require high processing speeds and support for multiple image formats. It is also energy efficient, allowing it to be used in applications that require long run times between charging. The numerous peripherals that are available make it suitable for a wide range of applications.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description