OP07DPG4

Current - Input Bias:	2nA
Base Part Number:	OP07D
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	±3 V ~ 18 V
Current - Supply:	--
Voltage - Input Offset:	60µV
Series:	--
Gain Bandwidth Product:	600kHz
Slew Rate:	0.3 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

＜h2＞OP07DPG4 Application Field and Working Principle＜/h2＞The OP07DPG4 is a low-power monolithic operational amplifier by Texas Instruments (TI). The device incorporates several features that make it ideal for use in industrial, consumer, and medical applications.The single-supply operation of the OP07DPG4 device allows it to be used in a variety of applications where a bipolar supply voltage is not available or not desired. This is typical in battery-powered applications. The device features low standby current, allowing it to be used in portable applications. The low power consumption allows the OP07DPG4 to be used in a variety of power-sensitive applications.The OP07DPG4 device is designed for linear amplification applications such as buffering, instrumentation, and voltage regulator circuits. The device has a wide input voltage range, up to ±15V, making it capable of driving most A/D and D/A converters. It is also suitable for use in high-input impedance circuits such as strain gages and thermisters, making it well suited for various medical applications. The OP07DPG4 supports both single- and dual-supply operation and has a common-mode input voltage range beyond the power-supply rails. It is also capable of driving both high and low impedances loads. The device can be used in a variety of circuit configurations such as summing amplifiers, active-filter applications, sample-and-hold circuits, and controlled feedback configurations. It is also suitable for Clocked Analog-to-Digital Conversion (CADC) applications.The OP07DPG4 features high input impedance, low output impedance, and low noise behavior. It has a slew rate of 4V/µs and a wide linear output voltage range of ±200mV. The device also features high slew-rate drive and low distortion, making it suitable for audio amplifier applications. The device is available in a variety of packages, including SOIC-8, MSOP-8, and PDIP-8. TI recommends the PDIP-8 package for thermal performance, signal integrity, and ease of operation. The working principle of the OP07DPG4 is based on the traditional operational amplifier configuration. The device combines high-input impedance (Ri) and an inverting amplifier to produce an amplified version of the input signal. The inverted signal is then fed back to the input through a resistive feedback loop, allowing the amplifier to accurately amplify the input signal with minimal noise and distortion. The output of the OP07DPG4 is also buffered by a high-speed buffer stage, providing additional protection against load and temperature fluctuations. There is also an integrated output current limiting feature that prevents abnormal current flow through the device. In summary, the OP07DPG4 is a low-power operational amplifier suitable for a variety of linear-amplification, instrumentation, and buffer applications. The device has wide input voltage range and is capable of driving both high and low impedance loads. It also features high input impedance, low output impedance, and a wide linear output voltage range of ±200mV. In addition, the device boasts low power consumption, low noise behavior, a fast slew rate, and high slew rate drive. The OP07DPG4 is available in a variety of packaging options and TI recommends the PDIP-8 package for best results. ＜/h2＞

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description