OP467GP

Current - Input Bias:	150nA
Base Part Number:	OP467
Supplier Device Package:	14-PDIP
Package / Case:	14-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	±4.5 V ~ 18 V
Current - Supply:	8mA
Voltage - Input Offset:	200µV
Series:	--
Gain Bandwidth Product:	28MHz
Slew Rate:	350 V/µs
Output Type:	--
Number of Circuits:	4
Amplifier Type:	General Purpose
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

---

The OP467GP is an operational amplifier (op-amp) that is used extensively in the design of linear and instrumentation amplifiers, such as buffer amps. It is an integrated circuit (IC) consisting of many transistors, capacitors and resistors that can be used to amplify small signal inputs into larger signal outputs with minimal distortion and noise. The OP467GP, as well as other models in the OP467 family, has a three-stage, high-performance amplifier design with a low voltage offset and excellent common-mode rejection ratio of 92dB, and can handle input voltages up to +/-13V. The OP467GP is designed to facilitate a wide range of applications. It can be used in motor driver circuits, opto-couplers, bridge amplifiers, comparators and integrators, among many other applications. Additionally, it is suitable for removal of high- and low-frequency noise, such as DC offsets and cross talk. One of the unique features of this op-amp is that it can be connected as an inverting amplifier or as a non-inverting one, enabling the user to optimize circuit performance. The working principle of the OP467GP is based on the differential amplifier topology, which is a type of amplifier that uses two input signals to achieve a desired gain. The two input signals, known as the differential inputs, are connected to the two input terminals of the amplifier and the output is connected to the output terminal. The differential amplifier amplifies the difference between the two input signals, while rejecting any common-mode signals present between the inputs.The OP467GP is designed with a three-stage amplifier design. The first stage consists of an input stage that amplifies the differential input signals and also filters high frequency noise. The second stage is a high-gain voltage amplifier that amplifies the signal from the first stage and further filters high frequency noise. The third stage is an output stage that further amplifies the signal from the second stage and also offers output protection from overload. The output from the OP467GP is typically connected to an output load, such as a relay, to interface with an external circuit. The input resistors provide temperature compensation and bias current protection, while the output resistors act as current limiting resistors and protect against over-current conditions. Additionally, this op-amp provides a means of adjusting the gain of the circuit by changing the feedback resistor value. With its wide range of features, the OP467GP is ideally suited for amplifying and conditioning signal in linear and instrumentation applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description