OPA1604AIDR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPA1604AIDR is an operational amplifiers (Op-Amp) with a slew rate of 8V per microsecond. It is a unity gain stable, low noise, low distortion, low power device and is capable of driving a variety of loads. The OPA1604AIDR is suitable for use in a variety of instrumentation applications including medical instruments, process control, audio, data acquisition, and other low voltage systems.

The OPA1604AIDR has two inputs, Inverting and Non-inverting, as well as two outputs, Out and In. The Inverting Input is where the signal to be amplified is input, and the Non-inverting Input is used to set the voltage gain of the amplifier. The Output is the amplified signal while the In output provides the same signal but at a reduced voltage range. The operating supply of the device is 3V to 11V so it can be powered by a wide range of voltage sources.

The OPA1604AIDR has a typical Voltage Gain of 200 and a quiescent current draw of 7 mA, and can operate over a wide temperature range from -40?C to +125?C. It is also capable of driving a wide range of different load types as well as providing excellent input and output linearity, flat frequency response, and very low THD and IMD performance. The OPA1604AIDR is also very cost effective and can provide a very stable, low noise signal to many different locations in a system.

The OPA1604AIDR is an ideal choice when signal amplification is required in a range of instrumentation applications. The device offers very low distortion and noise, excellent input and output linearity, wide signal range and low power operation. It is ideal for use in medical, process control, audio and data acquisition systems, and can provide a very cost effective and reliable solution. The OPA1604AIDR also provides excellent input and output linearity, flat frequency response and very low THD and IMD performance.

The working principle of the OPA1604AIDR is quite simple. The device takes the input signal, which is input at its inverting input, and amplifies it. The gain of the device is determined by the voltage applied to its non-inverting input. The output signal is generated from the output of the OPA1604AIDR. The device also utilizes its power supply to generate power for the internal operation of the amplifier. The operating supply of the device is 3V to 11V and this allows for a wide range of power sources to be used.

In summary, the OPA1604AIDR is a unity gain stable, low noise, low distortion, low power device and is suitable for use in a variety of instrumentation applications including medical instruments, process control, audio, data acquisition, and other low voltage systems. It is an ideal choice when signal amplification is required and offers excellent input and output linearity, flat frequency response, very low THD and IMD performance and low power operation. The OPA1604AIDR is also cost effective and can provide a very stable, low noise signal to many different locations in a system.

The specific data is subject to PDF, and the above content is for reference