OPA170AIDRLT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

OPA170AIDRLT is a linear amplifier designed by Texas Instruments, commonly used in instrumentation, OP Amps, Buffer Amps, and more. The OPA170 is a low-voltage, low-power, rail-to-rail output operational amplifier for portable (hand-held) instrumentation and data-acquisition systems. It is suitable for single supply operation and is capable of supplying a full rail-to-rail output swing with power supply voltages as low as 2.7 volts.

The OPA170 is part of the Texas Instruments TLV600 family. It provides low-voltage operation and rail-to-rail output drive capability with a maximum output current of 30mA and a minimum supply voltage of 2.7V. The OPA170 features low offset voltage (1mV max) and low input bias current (2nA max), which enables low residual errors. With its low noise (1.5nV/√Hz at 10kHz), high bandwidth (3MHz gain-bandwidth product for the OPA170AIDRLT), high slew rate (2.2V/µs for the OPA170AIDRLT), and low distortion, the OPA170 is an ideal solution for low-voltage, low-power operation.

The OPA170AIDRLT combines a precise amplifier and a dual PNP-NPN input stage. The amplifier can accommodate single-supply and dual supply operation, enabling it to operate in different applications such as signal gain, signal conditioning and data conversion. It is capable of driving both bipolar and unipolar loads, including resistor, capacitor and inductor, with a maximum output current of 30mA. The OPA170AIDRLT is available in both small-outline surface-mount (DIP) and low-profile (SC70) packages to suit the needs of the application.

The OPA170AIDRLT works on the principle of linear amplification, which is the process of increasing the strength of an electrical signal without affecting its waveform by using an external power amplifier. The signal is inputted into the amplifier, where it is amplified and outputted. The amount of amplification is determined by the amplifier’s gain, which is the ratio of output voltage to input voltage. The gain is adjusted using a potentiometer which varies the amount of total resistance in the amplifier’s circuit.

The OPA170AIDRLT is a versatile amplifier that has numerous applications in instrumentation, audio, and data acquisition. It can be used to amplify, condition, and convert signals in audio systems and data acquisition systems. It can also be used in measurement, control and feedback systems and in active filters such as high pass, low pass, band pass and notch filters. In addition, it can be used in combination with active devices to provide signal switching and signal routing.

In summary, the OPA170AIDRLT is a linear amplifier designed by Texas Instruments and is commonly used in instrumentation, OP Amps, Buffer Amps, and more. It has a low-voltage and low-power operation and can be used for signal gain, signal conditioning, data conversion, and filtering. Its rail-to-rail output swing and low noise and distortion make it ideal for low-voltage and low-power operation.

The specific data is subject to PDF, and the above content is for reference