OPA2107AU/2K5

Voltage - Input Offset:	100µV
Base Part Number:	OPA2107
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-25°C ~ 85°C
Voltage - Supply, Single/Dual (±):	9 V ~ 36 V, ±4.5 V ~ 18 V
Current - Output / Channel:	40mA
Current - Supply:	4.5mA
Series:	Difet®
Current - Input Bias:	4pA
Gain Bandwidth Product:	4.5MHz
Slew Rate:	18 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

OPA2107AU/2K5 is a low-noise,micro-power operational amplifier with a high common-mode rejection.It belongs to the linear-amplifiers-instrumentation, OP amps, buffer amps category and is compatible with both single-ended and fully differential input configurations in a variety of applications.OPA2107AU/2K5 utilizes the low-voltage operational amplifier architecture,which provides a combination of low-power consumption and low-noise operation.It offers a wide common-mode voltage range and high common-mode rejection.Its low noise performance,combined with its low-power consumption and wide common-mode voltage range,make it an ideal choice for a variety of amplifying applications such as medical instrumentation,industrial process control and audio processing.OPA2107AU/2K5 is optimized for fast transient response and low-noise performance.It features an output stage optimized for low-noise operation and a high-gain bandwidth product of nearly 20kHz.It can be powered at ±2.7V to ± 8V, while its typical supply current is 4.5mA.The main feature of OPA2107AU/2K5 is its common-mode rejection ratio(CMRR).OPA2107AU/2K5 features a high CMRR of 80dB typical at 1kHz.This is due to its optimized input amplifier design and common-mode noise cancellation techniques.The CMRR of OPA2107AU/2K5 ensures that only the desired signals are amplified,while common-mode noise is greatly reduced.The OPA2107AU/2K5 is available in a variety of packages and pinouts, including two SOT-23s and an 8-pin MSOP package.One of these packages is the MSOP package, which is an 8-pin, miniature surface-mount package.The MSOP package provides the flexibility of being mounted on a circuit board with a standard through-hole drill, or being soldered directly onto a board.The OPA2107AU/2K5 is resistant to power supply and output voltage transients.This makes it an ideal choice for battery-powered applications.It is also suited for automotive,audio and consumer electronics applications.The OPA2107AU/2K5 is compliant with the RoHS Lead-free requirements.The working principle of the OPA2107AU/2K5 is straightforward.The amplifier’s input stage creates an output signal by combining the signals at its two inputs. The output signal is then passed through the amplifier’s gain stage, which increases the signal strength based on the user-specified gain setting. Finally,the output stage filters out any noise which may have been generated during the amplification process.In conclusion,the OPA2107AU/2K5 is a low-noise,micro-power operational amplifier optimized for a variety of applications.Its low noise operation and low-power consumption make it ideal for medical instrumentation,industrial process control,audio processing and other sensitive applications.Its high common-mode rejection ratio and resistance to transients makes it a reliable choice for reliability-critical applications. Finally,its variety of packages and pinouts makes it a great choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description