OPA336N/3K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

OPA336N/3K is a multi-function operational amplifier produced by Texas Instruments. It is designed to be used in a wide range of general-purpose applications, including signal conditioning, audio signal processing, transducer interface, active filters and control circuitry. The OPA336N/3K is a single low-power, low-cost amplifier that offers high performance, dynamic range and linearity.

The OPA336N/3K is designed to operate at a maximum output voltage of 10V and a minimum of 10mV. It has a wide frequency response with a 3kHz cut-off frequency and a gain-bandwidth product of 3GHz. The OPA336N/3K also features a low input bias current of 5pA, making it well-suited for applications requiring high input impedance. With its wide bandwidth and high common-mode rejection ratio, the OPA336N/3K can be used in a wide range of applications, including instrumentation, audio signal processing, signal conditioning, and transducer interfacing.

The OPA336N/3K is a general-purpose op amp with features that make it suitable for a variety of applications. Its low power consumption and high signal-to-noise ratio make it ideal for use in power-sensitive applications, while its wide common-mode rejection ratio make it suitable for a wide range of signal-conditioning and audio applications. Its wide bandwidth and high gain make it suitable for interfacing with transducers and active filters.

In instrumentation applications, the OPA336N/3K works in a standard differential amplifier circuit, its two inputs being the signal voltage from a bridge or transducer and a reference voltage to ensure that the gain of the amplifier remains constant for a given input voltage. This differential amplifier can be used for measurements such as acceleration, force, and pressure. The OPA336N/3K can also be used in a range of audio signal processing applications, such as equalizers, compressors, and preamplifiers, as well as in active filters and control circuits.

The OPA336N/3K is based on a standard operational amplifier architecture, comprising an inverting and a non-inverting input, an output, and a supply pin. The inputs of the OPA336N/3K are connected to both the inverting and non-inverting inputs of the op amp. The output of the OPA336N/3K is the sum or difference of the two input voltages, multiplied by the gain of the amplifier. The supply of the OPA336N/3K can either be connected to a power supply or to the ground. Both the input and output of the amplifier are connected to the ground. The input and output of the OPA336N/3K are both single-ended, meaning that the signals are AC-coupled.

The OPA336N/3K offers a wide range of features that make it well-suited for use in a variety of applications. Its low-power consumption and high signal-to-noise ratio make it ideal for use in power-sensitive applications, while its wide common-mode rejection ratio makes it suitable for a wide range of signal conditioning and audio applications. With its wide bandwidth and high gain, the OPA336N/3K is perfectly suited for interfacing with transducers and active filters.

The specific data is subject to PDF, and the above content is for reference