OPA604AU/2K5G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPA604AU/2K5G4 is an ultra-low noise, high precision bipolar operational amplifier. It is designed for use in a wide variety of instrumentation, linear, buffers, and operational amplifiers, providing high precision and low noise performance characteristics. It is an ideal choice for a wide range of applications including precision amplification, sample-and-hold circuits, high speed audio, medical instrumentation, and data acquisition systems.

The OPA604AU/2K5G4 features a typical voltage noise density of 0.86 nv/√Hz, a gain bandwidth of 1MHz, and a unity gain bandwidth of 200KHz. It also features a high input impedance, low input bias current, and low input offset voltage. Additionally, the OPA604AU/2K5G4 operates at single-supply and dual-supply rails of ±15V, making it an ideal choice for instrumentation and sensor applications.

In terms of application, the OPA604AU/2K5G4 is best suited when superior performance is required, such as in medical equipment, high-speed audio, and data acquisition systems. It can also be used in sample-and-hold circuits where maximum precision is essential. Additionally, the OPA604AU/2K5G4 can be used for low-noise, low-power precision amplification for test and measurement applications.

When it comes to the working principle of the OPA604AU/2K5G4, it is based on a standard operational amplifier topology. This topology consists of an input stage, an output stage, and a feedback loop. The input stage takes the input signal and amplifies it up to the required level. The output stage then takes the signal and sends it to the output. Lastly, the feedback loop keeps the signal at the desired output level by regulating it based on the input signal.

Generally, the OPA604AU/2K5G4 operational amplifier operates in three modes: differential, single-input, and single-ended modes. In differential mode, the input to the amplifier is in the form of a differential signal. In single-input mode, the input signal is applied to a single input, while the output is taken from the other input. Lastly, in single-ended mode, the input is applied to one input while the output is taken from the same input.

The OPA604AU/2K5G4 is also designed with an open loop gain of approximately 140 dB, meaning it can amplify small input signals up to a large output signal. Additionally, the OPA604AU/2K5G4 features low input bias current, high common mode rejection ratio, and low power consumption.

Overall, the OPA604AU/2K5G4 is an excellent choice for a wide variety of instrumentation, linear, buffers, and operational amplifier applications. It offers superior performance in terms of noise, speed, precision, and power consumption. Moreover, the OPA604AU/2K5G4 has an open loop gain of 140 dB, making it ideal for amplifying small signals up to a large output signal.

The specific data is subject to PDF, and the above content is for reference