OPB931L55

Optical Sensors - Photointerrupters - Slot Type - Logic Output are widely used technology in a wide range of applications. The OPB931L55 is no exception. It is an opto-interruptor that uses a simple logic output to detect the presence of objects passing through a slot in a sensing surface. This sensing surface can be made of various materials, including metals, plastics, and even glass. The OPB931L55 opto-coupler can detect objects up to 0.3mm in size. This type of opto-interruptor was designed to provide a reliable digital logic signal output for applications requiring accurate signal detection.

The OPB931L55 opto-interrupter consists of four primary components: an emitting diode, a photo-detector, a logic output, and a control circuitry. The emitting diode is used to generate light that is then focused on the sensing surface. This light will be diffused by the object that crosses the sensing surface, sending a signal to the photo-detector. The photo-detector is then able to detect this light and then translate it into a digital signal. This digital signal is then sent to the control circuitry, which then converts it into the proper logic output.

The OPB931L55 opto-interrupter can be used in a wide variety of applications. These applications may include machine vision systems, motion control systems, position sensing systems, presence detection systems, and safety monitor systems. This type of opto-interrupter is often used in combination with other sensing technologies, such as encoders, photoelectric sensors, and limit switches. The OPB931L55 opto-interrupter can be beneficial when used in applications that require a reliable, accurate sensing signal.

In order to use the OPB931L55 opto-interrupter in a particular application, it must be properly configured. The proper configuration will depend on the application, but typically it will involve positioning the emitting diode, photo-detector, and logic output in the appropriate positions. The output signals should be routed in a way that will ensure that the proper logic signal will be sent to the necessary circuit. Additionally, the proper sensing surface should be chosen depending on the size of the objects that need to be sensed. This is typically an opaque or semi-transparent material that allows a certain amount of light to be diffused.

The OPB931L55 opto-interrupter is a reliable device that can provide accurate signal detection in a wide range of applications. When properly configured, it can be used to detect objects up to 0.3mm in size and can provide a reliable digital logic output. This is beneficial for applications that require accurate sensing signals, such as machine vision systems, motion control systems, position sensing systems, presence detection systems, and safety monitor systems.