OPL551

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPL551 is an optical photo detector with a logic level output, capable of detecting fluctuations in the amplitude of a light source. It can be used in a variety of applications, including solid-state lighting management, light sensing for HVAC (heating, ventilation and air conditioning) and industrial process control systems. It is also utilized in motion detection, surveillance cameras, level detection, and ambient light sensing.

The OPL551 is a three-pin device, comprising of a photo detector, a logic circuit and an output pin. The photo detector consists of a photodiode that converts incident light energy into electrical signals. The logic circuit ensures that the signal is converted into a digital signal, similar to a logic 1 or 0. Finally, the output pin produces a logic level output through which the device can be controlled. It is designed to be used in a wide range of optical applications, such as near-infrared (NIR) sensing and visible light sensing.

The working principle of the OPL551 is relatively simple. It senses changes in the intensity of light and produces an appropriate logic level output. The output signal is based on the signal strength of the light source, which is compared against a reference voltage. When the light intensity exceeds the reference voltage, the output signal will be at its maximum value. Conversely, when the light intensity falls below the reference voltage, the output signal will be at its lowest value.

When the OPL551 is used in applications such as lighting management, HVAC, or process control, the light source must be stabilized for consistent results. A light source with a narrow beam width, such as an LED, is recommended for optimal performance in these areas. Additionally, the light source should have a good signal-to-noise ratio, as the OPL551 must be able to detect small changes in light intensity.

The OPL551 is a versatile device with a wide range of applications. It can be used in solid-state lighting, HVAC, and industrial process control systems. It is also used in motion detection, surveillance cameras, level detection, and ambient light sensing. Its three-pin design and logic level output make the OPL551 a convenient device to integrate into existing systems.

The specific data is subject to PDF, and the above content is for reference