OPT101P-JG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical sensors typically consist of a light source, a detector, and an electronic circuit to interpret signals from the detector. Depending on the type of optical sensor, the light source can be an infrared LED, a visible LED, an ultraviolet light, or multiple kinds of light that emit in different wavelengths to detect different colors. The detector usually covers a range of visible, infrared, and ultraviolet from 400 nm to 1100 nm.

OPT101P-JG4 is an optical sensor that is capable of detecting ambient light, IR, and UV radiation. It functions by emitting an infrared light into the space, detecting reflected light intensity, and then calculating the relative intensity by comparing it to a known current or reference light level. This relative intensity is then transformed into an analog output signal, the magnitude of which is proportional to the intensity of the incident light. This analog output signal can be connected to and processed by a microcontroller for further analysis.

The OPT101P-JG4 is a particularly useful device for applications that require feedback from reflected light intensity, such as street illumination, automated lighting control, and security systems. With the OPT101P-JG4, it is possible to detect small changes in light levels that may be outside the visible spectrum, such as infrared or ultraviolet radiation. The device is also effective for scenarios where uniform lighting levels are desired, because its feedback loop enables the system to adjust the lights accordingly.

In terms of its working principle, the OPT101P-JG4 utilizes the optical phenomenon of photometry to measure the amount of reflected light. The photometric sensor includes an LED light source and a light sensor. When the LED light is turned on, it emits photons (light particles) in the surrounding environment. If a reflective surface is present, the photons will be reflected back towards the device and will be detected by the light sensor. This enables the device to measure the relative intensity of the reflected light.

TheOPT101P-JG4 utilizes an adjustable integrated circuit to compare the reflected light intensity to a known reference level. Depending on the comparison result, the adjustment of the integrated circuit will cause the analog output signal to either increase or decrease in magnitude. This output signal is then passed to a microcontroller, which can be used to interpret the light intensity value and act accordingly (eg adjusting the brightness of a streetlight).

In conclusion, the OPT101P-JG4 optical sensor provides an effective tool for applications that need to detect and respond to changes in the intensity of ambient light, IR, and UV radiation. Its working principle of photometry and adjustable integrated circuit makes it particularly effective for scenarios where uniform lighting levels are desired.

The specific data is subject to PDF, and the above content is for reference