| Allicdata Part #: | P-2000-101G-15-AN-ND |
| Manufacturer Part#: |
P-2000-101G-15-AN |
| Price: | $ 13.53 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | Nidec Copal Electronics |
| Short Description: | PRESSURE TRANSDUCERS |
| More Detail: | Pressure Sensor 1.42 PSI (9.81 kPa) Gauge Male - 0... |
| DataSheet: |  P-2000-101G-15-AN Datasheet/PDF |
| Quantity: | 1000 |
| 50 +: | $ 12.30100 |
| 100 +: | $ 11.90420 |
| 500 +: | $ 11.11050 |
| Series: | P-2000 |
| Part Status: | Active |
| Pressure Type: | Gauge |
| Operating Pressure: | 1.42 PSI (9.81 kPa) |
| Output Type: | Analog Voltage |
| Output: | 0 mV ~ 50 mV |
| Accuracy: | ±0.15% |
| Voltage - Supply: | -- |
| Port Size: | Male - 0.13" (3.2mm) Tube |
| Port Style: | Barbless |
| Features: | Temperature Compensated |
| Termination Style: | PC Pins |
| Maximum Pressure: | 2.84 PSI (19.6 kPa) |
| Operating Temperature: | -20°C ~ 80°C |
| Package / Case: | 6-DIP |
| Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Pressure Sensors, Transducers are measurement devices that measure the pressure of gases or liquids. The P-2000-101G-15-AN is a type of such pressure sensors. It usually reads absolute and differential pressure in H20, gas and air.
This type of pressure sensors can be used in many different applications. One application is in the air flow measurement in industrial or environmental research. The sensors measure the air pressure around a particular object and a differential pressure can be found by using two of them at a time. This can be use to determine the amount of air flow that passes through the object, which can be used for further research.
Another application of P-2000-101G-15-AN is in the measurement of liquid levels in tanks. By measuring the pressure difference between the top and the bottom of the tank, the level of the liquid can be determined. Additionally, it can also be used in determining the flow rate of fluids in a pipe or enclosed environment.
The basic working principle of this type of pressure sensors is based on the measurement of physical changes in a material under the pressure of a gas or liquid. When pressure is applied, the material expands or contracts, which causes a change in its physical properties. The sensor then captures this change and measures the pressure accordingly.
Most of the pressure sensors are based on either a mechanical or an electrical principle. The mechanical principle uses the force exerted by the liquid or gas against the material to create a mechanical movement, which is then used to generate an electrical signal. The electrical principle uses an electrical strain gauge or membrane, which is placed inside the material and measures the strain caused by pressure changes.
The P-2000-101G-15-AN pressure sensors can be used for various industrial and environmental research purposes. It has a wide range of applications in measuring liquid levels, air flow, and flow rate of fluids. Additionally, it is simple to use and can easily measure small changes in pressure. With its robust design, it is very reliable and therefore suitable for many industrial and environmental research purposes.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...