P-3000S-101D-10

Series:	P-3000S
Part Status:	Active
Pressure Type:	Differential
Operating Pressure:	1.42 PSI (9.81 kPa)
Output Type:	Analog Voltage
Output:	0 mV ~ 50 mV
Accuracy:	±0.1%
Voltage - Supply:	--
Port Size:	--
Port Style:	Barbless
Features:	Temperature Compensated
Termination Style:	PC Pin
Maximum Pressure:	2.84 PSI (19.6 kPa)
Operating Temperature:	-20°C ~ 100°C
Package / Case:	5-DIP
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers P-3000S-101D-10 is a kind of pressure transducers, which is widely applied in pressure detecting fields. This article will give a brief introduction of the application field and working principle of the P-3000S-101D-10. Application FieldThe P-3000S-101D-10 pressure transducers have a wide range of applications. They are mainly used in industrial, medical and scientific fields. They are commonly used in hydraulic systems, medical devices, laboratory experiments, quality control, stainless steel containers and many other applications. They can be used to measure pressure range from 0 to 3000 psig. The P-3000S-101D-10 can also be used in the aerospace industry. They are used to measure on-board aircraft pressure, from cabin pressure control to calculating the amount of fuel required to safely reach a certain altitude. In addition, they can be used to measure the environmental pressure in space. This transducer can measure high or low pressure, and can withstand extreme temperature ranges.Working PrincipleP-3000S-101D-10 pressure transducer is based on the Wheatstone bridge. One of the main components of the transducer is a strain gauge, which is made up of a semiconductor material. The strain gauge is connected to a diaphragm. When the pressure is applied to the diaphragm, the strain gauge changes its resistance due to the applied pressure. This change in the resistance is then measured and converted into an electrical signal.The signal from the P-3000S-101D-10 pressure transducer is then filtered and amplified by a circuit. The signal is then converted to a digital signal which can be easily interpreted or displayed. The standard output of the pressure transducers is a 0 to 5 volts DC or 0/4 to 20 mA DC current, which can be used to transmit the data further.The P-3000S-101D-10 has various output signals that can be customized according to various requirements. In addition, it is also equipped with many features such as over-pressure protection, reverse power protection, pressure spikes protection, temperature compensation, etc. These features make the P-3000S-101D-10 suited for a wide variety of applications.ConclusionThe P-3000S-101D-10 is a high precision pressure transducer which is widely used in various types of applications. It has a wide range of features which makes it suitable for many types of application. The Wheatstone bridge based transducer provides accurate measurements of pressure which is then transmitted to a PC or another device via a variety of output signal types. The P-3000S-101D-10 has proven to be a reliable and effective pressure transducer for many applications and will continue to be an important component for many industrial, medical and scientific applications.

The specific data is subject to PDF, and the above content is for reference