| Allicdata Part #: | 1861-1004-ND |
| Manufacturer Part#: |
P1A-51G-1-A-06-C-E |
| Price: | $ 99.55 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | Sensata-Kavlico |
| Short Description: | SENSOR PRES 0-10PSI ABS 4-20MA 1 |
| More Detail: | Pressure Sensor 10 PSI (68.95 kPa) Gauge Female - ... |
| DataSheet: |  P1A-51G-1-A-06-C-E Datasheet/PDF |
| Quantity: | 10 |
| 1 +: | $ 90.49950 |
| 10 +: | $ 83.09070 |
| 50 +: | $ 78.54350 |
| Series: | -- |
| Part Status: | Active |
| Pressure Type: | Gauge |
| Operating Pressure: | 10 PSI (68.95 kPa) |
| Output Type: | Analog Current |
| Output: | 4 mA ~ 20 mA |
| Accuracy: | ±1% |
| Voltage - Supply: | 9 V ~ 30 V |
| Port Size: | Female - 1/4" (6.35mm) NPT |
| Port Style: | Threaded |
| Features: | -- |
| Termination Style: | M12, 4 Pin |
| Maximum Pressure: | -- |
| Operating Temperature: | -30°C ~ 120°C |
| Package / Case: | Cylinder |
| Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The P1A-51G-1-A-06-C-E is an ultrasonic transducer which is categorized as a pressure sensor. Pressure sensors are isolated or non-isolated instruments used for measuring the pressure in an area and providing an output signal which can be used to monitor changes in the pressure. Pressure can be measured in both absolute and gauge formats. This transducer is commonly used in a variety of applications, including industrial process control, medical diagnostics, and environmental monitoring.
The P1A-51G-1-A-06-C-E pressure sensor is composed of a pressure transducer that converts the physical pressure into an electrical signal. The transducer is mounted inside a pressure chamber which contains a pressure diaphragm or Bourdon tube. The pressure is exerted on the diaphragm by the fluid or gas inside the chamber. The diaphragm deflects in proportion to the pressure causing the pressure signal on the transducer to change. This change in the pressure signal is then amplified and converted into an output signal for further processing and control.
The P1A-51G-1-A-06-C-E also uses an ultrasonic transducer to measure pressure. Unlike other pressure sensors, the ultrasonic transducer does not make direct contact with the pressure source. Instead, it uses sound waves to measure the pressure. Ultrasonic transducers are used in a variety of applications where the pressure source is too inaccessible or the measurement point must travel within a limited space. The transducer is also used in applications with very low pressures such as in medical and laboratory instruments.
The P1A-51G-1-A-06-C-E is a reliable and accurate pressure sensor for many industrial and medical applications. Its ultrasonic transducer provides the ability to measure pressure within a small space, and its adjustable range allows measurements to be taken over a wide range of pressures. This transducer is an excellent choice for applications requiring accurate and fast pressure measurement.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...