P25C42D12C1-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors are electromechanical switches used to control an electrical circuit through a manual or automatic signals. By controlling a circuit, contactors are used to provide protection against overload, short-circuiting, and other hazards. The P25C42D12C1-24 contactor is a high-voltage, three-pole, high-current contactor designed for applications like motor control. It has a maximum current rating of 24 A and a voltage rating of 220 VAC. With its rugged design, the P25C42D12C1-24 provides reliable operation even in harsh environments.

The P25C42D12C1-24 contactor is designed to control motor start and stop operations. The contactor can be used in applications like AC motors, compressors, pumps, and other motor-driven equipment. It is capable of operating at frequencies up to 400 Hz. With its built-in thermal overload protection, the contactor automatically shuts off the power when it detects an overload. It is also designed with an adjustable timer that can be programmed to turn off the contactor at a specific time after the power has been turned on.

The contactor works by using electromechanical relays that cause the contacts to open and close in response to an electrical signal. The contacts are made of copper and are designed to provide a low-resistance connection between two circuits. When the contactor is energized, current flows from a power source through the contactor and into the circuit. The contactor then opens and closes in response to the electrical signal sent to it. When closed, the contacts allow the current to flow from the power source and then power the device connected to the circuit.

The contactor\'s main components are the relay coil, contact switch, and contact arm. The contact arm is connected to the relay coil, which is in turn connected to the power source. When the relay coil is energized, the arm is forced outward. This movement causes the contact switch to open and close in response to the electrical signal sent to it. The contactor also has an auxiliary switch which is used to control the contactor\'s timer. The timer can be set to automatically turn off the contactor at a preset time after the power has been turned on.

The P25C42D12C1-24 contactor is a reliable device used in a variety of applications. It is designed to provide reliable protection against overloads, short-circuits, and other hazards. It is capable of operating at up to 400 Hz and can be programmed to automatically turn off the power at a specific time after powered on. With its rugged design, the P25C42D12C1-24 contactor can provide reliable operation even in harsh environments.

The specific data is subject to PDF, and the above content is for reference