P2I2305NZG-08SR Integrated Circuits (ICs) |
|
Allicdata Part #: | P2I2305NZG-08SROSTR-ND |
Manufacturer Part#: |
P2I2305NZG-08SR |
Price: | $ 0.75 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC CLK BUF 1:5 133.33MHZ 8SOIC |
More Detail: | Clock Fanout Buffer (Distribution) IC 1:5 133.33MH... |
DataSheet: | P2I2305NZG-08SR Datasheet/PDF |
Quantity: | 1000 |
2500 +: | $ 0.68040 |
5000 +: | $ 0.65520 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | Fanout Buffer (Distribution) |
Number of Circuits: | 1 |
Ratio - Input:Output: | 1:5 |
Differential - Input:Output: | No/No |
Input: | CMOS |
Output: | CMOS |
Frequency - Max: | 133.33MHz |
Voltage - Supply: | 3 V ~ 3.6 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount |
Package / Case: | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package: | 8-SOIC |
Base Part Number: | P2P2305NZ |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The P2I2305NZG-08SR is a clock/timing device. It belongs in the Clock Buffers, Drivers family, which bridges the gap between outputting a signal while keeping power consumption, jitter and EMF low. This is a semiconductor device, which has a variety of uses and can be found in many systems. It can adjust the input clock for faster or slower clock speeds without introducing jitter or noise, making it great for clocks, timing, and communications.
The P2I2305NZG-08SR has an adjustable input clock range from 0.1MHz to 30MHz. It is capable of adjusting the output clock from 10MHz to 800MHz. The device has an amplitude of up to 350mV. It comes in an 8-pin PQA flatpack, making it an ideal solution for board-level applications. This product has a wide temperature range, from -40 to +85 degrees Celsius, allowing it to survive in inhospitable environments.
The P2I2305NZG-08SR clock buffer and driver can be found in many applications. It is often used in optical networks, FPGA or ASIC designs, storage systems and embedded controllers. It can also be used in data transmission, clock synchronization, and waveform applications. Additionally, this device provides an integrated driver, allowing it to switch quickly and accurately between inputs and outputs.
The working principle behind the P2I2305NZG-08SR clock/timing device is simple. It starts by using an input clock signal to generate a stable clock signal. It then sends out this signal at a higher frequency, which is adjusted using on-chip tuning circuitry. It also modifies the signal to fit the desired application. Finally, the device uses a wide output voltage range, which ensures that it is compatible with any operating system.
In addition to its impressive clock/timing capabilities, the P2I2305NZG-08SR also offers maximum electrical-noise immunity and signal quality, thanks to its advanced circuit design. It also has an on-chip power-down feature, which reduces power consumption during standby mode. Furthermore, it is available in a leadless chip-carrier (LCC) package with UL approved insulation.
The P2I2305NZG-08SR clock buffer and driver is an ideal choice for any application requiring frequency synthesis, clock distribution, and signal buffering. Its impressive features make it an affordable and reliable solution for board-level applications. It is easy to integrate with existing circuitry, and its wide voltage range ensures compatibility with any setup.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
P2I2304NZF-08-TR | ON Semicondu... | 0.0 $ | 1000 | IC CLK BUF 140MHZ 3.3VClo... |
P2I2305NZG-08SR | ON Semicondu... | 0.75 $ | 1000 | IC CLK BUF 1:5 133.33MHZ ... |
IC CLOCK MANANGEMENTClock IC
IC CLOCK BUFFER 32VFQFPNClock IC
IC CLK BUFFER 2:4 13.4MHZ 24QFNClock Fan...
IC CLOCK BUFFER MUX 3:11 48TQFNClock Fan...
IC CLK BUFFER 1:10 100MHZ 20QSOPClock Fa...
IC CLK BUFFER 1:6 100MHZ 16TSSOPClock Fa...