P409EL474M275AH330

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic interference/radio-frequency interference (EMI/RFI) Filters are widely used in the electronic engineering industry. The P409EL474M275AH330 Filter is a popular type of filter in this product category. It is used to reduce or block the transmission of electromagnetic fields (EMFs), generated by electrical and electronic devices, that may interfere with the functioning of other devices and systems.

The P409EL474M275AH330 filter is a passive LC (Inductance Capacitance) network filter that combines an inductor and capacitor to disrupt and attenuate noise frequencies up to 1MHz. It is built with four inductors (L1–L4) and three capacitors (C1–C3). This specific filter can attenuate very low frequencies down to 10Hz and can have a strong shielding effect when used in high frequency applications.

The P409EL474M275AH330 typically finds applications in computers, consumer electronics, telecom, and audio/video systems. It is commonly used to ground noisy components such as power sources, audio amplifiers, and analog displays, and also to reduce noise generated by digital circuits such as microprocessors and clock circuits. It is used to reduce electromagnetic contamination, as well as to improve signal integrity.

In terms of working principle, the P409EL474M275AH330 filter acts as a low-pass filter by attenuating higher-frequency EMF signals, while allowing lower-frequency signals to pass through. The low-pass filter works by blocking frequencies that are above its cutoff frequency. The cutoff frequency is determined by the size and type of inductors and capacitors in the circuit, and the filter’s performance is affected by its underlying electrical properties.

By combining multiple inductive and capacitive elements, such as in the P409EL474M275AH330 filter, designers can make a more accurate filter that can block more than one type of EMF signal at a higher attenuation rate. This type of filter is commonly used in applications where high levels of interference need to be eliminated.

To sum up, the P409EL474M275AH330 is a cost-effective and dependable EMI/RFI filter that\'s used in a number of industries, from consumer products to industrial applications. It is a low-pass filter that relies on inductors and capacitors to block frequencies greater than the cutoff frequency, as well as providing a strong shield against high-frequency interference.

The specific data is subject to PDF, and the above content is for reference