P40P47D13P1-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Electromechanical)

A contactor is an electromechanical relay device that provides switching capabilities by means of an electrical current. They are used in a variety of applications where the current needs to be either stopped or changed in order to accomplish a desired outcome. Contactors are used in many industrial operations, from lighting to motor control, and are available in a variety of sizes and voltage ratings.

An electrical contactor, such as the P40P47D13P1-24, consists of two separate coils. When the coil current is activated, a movable plunger is drawn towards an electromagnet, creating contact between the two and allowing current to flow. This contact is held until the coil current is turned off, at which point the plunger returns to its original position, disconnecting the circuit.

The P40P47D13P1-24 is a medium-voltage direct-acting contactor that is suitable for use in applications in three-phase networks with a maximum current rating of 60A at 230V or 100A at 440V. It is UL and CSA approved, making it suitable for use in North America and Europe.

The advantages of using a contactor, such as the P40P47D13P1-24, in an application are many. Contactors are able to switch large currents quickly and reliably, making them suitable for machinery needs or high-power applications. They are also designed to reduce sparking and electrical noise, and can provide protection against short-circuiting and overloads. Additionally, contactors are capable of conveniently controlling multiple loads simultaneously, and are able to perform more complex switching operations, such as reversing or timing control.

The primary application of a contactor is to switch an electrical load, such as a motor, on and off. Contactors are often used in combination with overload relays to protect the load from damage caused by over currents. It is important to note that the P40P47D13P1-24 contactor is not suitable for use with motors larger than 10hp, and should not be used with inductive loads.

In addition to motor control, contactors can also be used in various other applications, such as lighting and HVAC systems. They can also be used as a safety measure in applications that require high levels of isolation, such as those involving hazardous substances or high voltages. Contactors are also commonly used in the control systems of automated machines, providing accurate and repeatable switching performance.

Overall, the P40P47D13P1-24 contactor is an excellent choice for a wide range of applications requiring the reliable switching of electrical currents. With its UL and CSA approvals, it is suitable for use in both North America and Europe, and can provide excellent protection and control in motor control and other applications.

The specific data is subject to PDF, and the above content is for reference