| Allicdata Part #: | P51-100-A-J-P-4.5OVP-000-000-ND |
| Manufacturer Part#: |
P51-100-A-J-P-4.5OVP-000-000 |
| Price: | $ 93.26 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | SSI Technologies Inc |
| Short Description: | SENSOR 100PSI 3/8-24UNF .5-4.5V |
| More Detail: | Pressure Sensor 100 PSI (689.48 kPa) Absolute Male... |
| DataSheet: |  P51-100-A-J-P-4.5OVP-000-000 Datasheet/PDF |
| Quantity: | 1000 |
| 5 +: | $ 84.77770 |
| Series: | MediaSensor™ |
| Part Status: | Active |
| Pressure Type: | Absolute |
| Operating Pressure: | 100 PSI (689.48 kPa) |
| Output Type: | Analog Voltage |
| Output: | 0.5 V ~ 4.5 V |
| Accuracy: | ±0.5% |
| Voltage - Supply: | 5V |
| Port Size: | Male - 3/8" (9.52mm) UNF |
| Port Style: | Threaded |
| Features: | Amplified Output, Temperature Compensated |
| Termination Style: | Packard, 3 Pin |
| Maximum Pressure: | -- |
| Operating Temperature: | -40°C ~ 105°C |
| Package / Case: | Cylinder |
| Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Pressure Sensors, Transducers are devices that convert a physical quantity into electrical signals that are used as input to a control system or computer for further processing. Specifically, P51-100-A-J-P-4.5OVP-000-000 is an absolute pressure transducer which has a pressure measuring range from 30 to 110 kPa and a crystal-regulated crystal oscillator for a signal output.
This pressure transducer has a stainless steel body with an optional inhalation filter for mounting. Its output signal is a frequency output that is proportional to the applied pressure. The pressure measuring range is adjustable by means of a variable resistor. It also has a digital display with two buttons that can be used to select various functions including sensitivity adjustment, calibration, and zero adjustment.
The working principle of the pressure transducer is based on the Wheatstone bridge. A Wheatstone bridge consists of four resistors resistors X, Y, Z, and V which are connected in series between two voltage sources. When a pressure is applied to the transducer, it causes the resistances of X, Y, and Z to vary in relation to the applied pressure. This change in resistance produces a voltage output that is proportional to the applied pressure.
The output signal from the transducer is passed through a frequency to voltage converter and then to a digital display. The frequency to voltage converter is used to convert the frequency output from the transducer into a voltage output which can then be digitized by the digital display.
The P51-100-A-J-P-4.5OVP-000-000 pressure transducer is typically used in various hydraulic and pneumatic control systems, such as in water metering, pressure control, and flow control. It is also used in conjunction with other types of pressure transducers to measure pressure at different locations in a system. This transducer is also suitable for measuring side pressure across different hydraulic or pneumatic system components.
The pressure transducer is designed to be used in a wide range of applications due to its temperature range, vibration resistance, and long-term stability. It is also designed for easy installation and provides high accuracy, long life, and a low power consumption.
The specific data is subject to PDF, and the above content is for reference
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...