P51-100-A-L-M12-4.5OVP-000-000

Series:	MediaSensor™
Part Status:	Active
Pressure Type:	Absolute
Operating Pressure:	100 PSI (689.48 kPa)
Output Type:	Analog Voltage
Output:	0.5 V ~ 4.5 V
Accuracy:	±0.5%
Voltage - Supply:	5V
Port Size:	Female - M10 x 1.25
Port Style:	Threaded
Features:	Amplified Output, Temperature Compensated
Termination Style:	M12, 4 Pin
Maximum Pressure:	--
Operating Temperature:	-40°C ~ 105°C
Package / Case:	Cylinder
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, TransducersThe P51-100-A-L-M12-4.5OVP-000-000 pressure sensor/transducer is designed to measure and detect pressure levels in a range of applications and systems. Pressure sensing and monitoring is accomplished using a variety of components and technologies, as well as the base pressure sensor/transducer design.The P51-100-A-L-M12-4.5OVP-000-000 pressure sensor/transducer is a rugged and reliable design that delivers accurate measurements even in extreme conditions. It features a wide temperature range and wide pressure range that make this pressure sensor/transducer an ideal choice for many application fields.This pressure sensor/transducer features a 1/8” connected cable, with a peak drift of 0.02%. It works on a 0.2- 60 bar range with an accuracy of ±03% at +25°C. It has an electrical connection of a M12x1 connector and a 4 pin male connector, and has an overload pressure of up to OVP 400. It also includes a temperature compensation circuit with an operational temperature range of -20°C to +85°C.The P51-100-A-L-M12-4.5OVP-000-000 pressure sensor/transducer has a mounting thread size of M12x1. It is designed for industrial applications, and is especially suitable for systems requiring accurate pressure measurements, such as automotive systems, pumps, process monitoring, and safety monitoring systems.The working principle of the P51-100-A-L-M12-4.5OVP-000-000 pressure sensor/transducer is based on a resistive strain gauge design. This design uses a series of resistive elements mounted on a diaphragm to measure the pressure. When pressure is applied to the diaphragm, it causes a corresponding strain on the resistive strain gauge, which in turn causes a resistance change. This resistance change is measured and converted into an electrical signal that can be read and processed.The P51-100-A-L-M12-4.5OVP-000-000 pressure sensor/transducer is an ideal choice for many applications that require reliable pressure measurements and control, including automotive, industrial, safety, and medical systems. Its rugged design and excellent accuracy make it suitable for harsh environmental conditions. Its wide temperature and pressure range makes it suitable for any temperature or pressure measurement. In addition, its easy installation and low cost make it a cost-effective solution for many different applications.

The specific data is subject to PDF, and the above content is for reference