P51-100-A-T-MD-4.5OVP-000-000

Pressure sensors, transducers, and related components are a key component of many engineering and industrial systems. A pressure sensor converts a measured force into an electrical signal, usually by sensing the pressure on an element. In particular, the P51-100-A-T-MD-4.5OVP-000-000 is a pressure transducer commonly used in applications that require a reliable, accurate and direct measurement of pressure.

The P51-100-A-T-MD-4.5OVP-000-000 pressure transducer is designed with a shielded cable connection for EMI/RFI protection and for optimal signal transfer. It features a large, integrated mounting bracket for easy installation, and comes in a variety of sizes. This transducer is highly accurate, with a linearity of ±0.04% of full-scale. It is also designed for high accuracy and resolution, with a long-term stability of ±2.0% of full-scale.

This pressure transducer is generally used in industrial applications where reliable and accurate direct measurements are required. Common uses for the P51-100-A-T-MD-4.5OVP-000-000 include system monitoring in machine operation, laboratory testing and calibration, environmental process control, and medical equipment. The most important benefit of the P51-100-A-T-MD-4.5OVP-000-000 is that it provides a stable and reliable direct measurement of pressure without the need for a separate external calibration unit.

The working principle of the P51-100-A-T-MD-4.5OVP-000-000 is based on the physical phenomenon of piezoresistance, also known as piezoresistive effect. In this effect, an electric current flows through a wire that is subjected to a certain amount of pressure. When the wire is subjected to an external pressure, its electrical resistance changes. This change can then be detected by measuring the current flowing through the wire, and used to calculate the pressure that was applied to the wire.

The P51-100-A-T-MD-4.5OVP-000-000 pressure transducer is designed so that this piezoresistive effect is maximized. Its design is made up of a network of strain gauges, which are small electrical resistors that are connected to a Wheatstone bridge arrangement. When an external pressure is applied, the strain gauges will experience varying resistance. This resistance change can then be determined by measuring the voltage differences across the bridge. This voltage is then used to calculate the external pressure.

The P51-100-A-T-MD-4.5OVP-000-000 pressure transducer is designed to produce a highly accurate and reliable output signal, and is ideal for a variety of industrial applications. It can successfully measure both positive and negative pressures, and is also very durable and robust, making it suitable for harsh environments. It is a reliable, cost-effective solution for measuring pressure.